2026-10-21




New High-Efficiency Agricultural Enhancing Adjuvants
Modern crop production depends on the efficient use of plant protection products, fertilizers, water, labor, and energy. Although active ingredients remain central to agricultural performance, the final result of an application is also strongly influenced by how well the formulation spreads, adheres, penetrates, and remains available on the plant surface. A highly effective pesticide can deliver disappointing field performance when spray droplets bounce away, run off leaves, evaporate too quickly, or fail to pass through natural surface barriers.
GT-1000 is a high-efficiency agricultural enhancing adjuvant based on polyether-modified trisiloxane technology. It is designed to improve the wetting, spreading, adhesion, penetration, and absorption behavior of agricultural spray solutions. With a reported purity of 99.8%, a low surface tension of less than 20.5 mN/m at a 0.1% concentration, and a balanced pH range of 6.5–7.5 in a 1% aqueous solution, the product is engineered for reliable performance in a broad range of agricultural applications.
The product is suitable for use with many crop protection and crop nutrition programs, including herbicides, fungicides, insecticides, foliar fertilizers, and other agricultural formulations where improved coverage and uptake are required. Its performance is especially valuable when plants have waxy, water-repellent, or uneven leaf surfaces, or when growers need to improve the efficiency of a spray without increasing the total volume of active ingredient.
In addition to its agricultural function, the product reflects the manufacturing and technical capabilities of Hebei Guituo New Material Co., Ltd., a high-tech silicone materials enterprise integrating research and development, production, quality control, and sales. The company focuses on the development of organosilicon additives, surfactants, modified silicone oils, silicone oils, wetting agents, defoamers, and related materials for agricultural, textile, electronics, daily chemical, and industrial applications.
By combining silicone chemistry, process control, laboratory testing, and application-oriented technical support, the manufacturer provides a material that is not merely a blending aid but a performance-enhancing component for more efficient agricultural programs.
GT-1000 is identified as a new high-efficiency agricultural enhancing adjuvant and silicone surfactant. Its principal chemical description is polyether-modified trisiloxane. This class of organosilicon surfactants is recognized for its ability to reduce the surface tension of aqueous spray mixtures to a much lower level than conventional water-based systems can usually achieve.
| Item | Specification |
|---|---|
| Product model | GT-1000 |
| Product name | New High-Efficiency Agricultural Enhancing Adjuvants |
| Product category | Agricultural silicone synergist |
| Chemical description | Polyether-modified trisiloxane |
| CAS number | 27306-78-1 |
| EINECS number | 608-078-3 |
| Purity | 99.8% |
| Viscosity at 25°C | 30–50 mm²/s |
| Surface tension at 0.1% by weight | Less than 20.5 mN/m |
| Cloud point at 1.0% by weight | Not more than 35°C |
| pH value of a 1% aqueous solution at 25°C | 6.5–7.5 |
The combination of low surface tension, moderate viscosity, controlled cloud point, and near-neutral aqueous pH gives GT-1000 a useful balance between handling convenience and application performance. The product can be incorporated into suitable spray tanks or formulation systems according to the compatibility requirements of the pesticide, fertilizer, crop, and local agricultural regulations.
As with all adjuvants, the exact dosage should be determined through formulation testing, label instructions, crop safety evaluations, and local registration requirements. A small jar test and a limited field trial are recommended before large-scale application, particularly when the product is combined with unfamiliar formulations or sensitive crops.
Agricultural spraying is a complex physical process. The formulation must leave the nozzle, form droplets of an appropriate size, travel through the air, reach the plant, spread across the target surface, remain attached, and allow the active ingredient to enter or affect the target organism. Failure at any stage can reduce the amount of active ingredient that reaches the intended target.
Plant leaves are not passive surfaces. Many are covered with waxes, hairs, crystalline deposits, or irregular structures that repel water and prevent uniform coverage. A conventional water droplet may remain rounded, roll toward the edge of the leaf, or fall to the ground. Even when a droplet remains on the surface, it may cover only a small area and may not provide sufficient contact with the pest, pathogen, or weed tissue.
Weather can further reduce application efficiency. Rainfall after spraying can wash away deposits before they have dried or been absorbed. Low humidity can accelerate evaporation. Wind can move fine droplets away from the crop. High temperatures can change drying behavior and formulation stability. Dense foliage can also prevent droplets from reaching lower leaves and protected plant tissues.
Adjuvants help address some of these challenges by modifying the physical behavior of the spray solution. A silicone surfactant such as GT-1000 can reduce surface tension, promote rapid spreading, improve surface contact, and support more efficient penetration into plant tissues. These functions can help growers obtain more consistent results from the active ingredients already selected for their crop protection program.
The value of an adjuvant is therefore measured not only by the quantity added to a spray tank, but by the improvement it creates in the entire application system. Better coverage may reduce untreated areas. Improved adhesion may reduce losses caused by light rainfall. More effective absorption may help the active ingredient reach its target sooner. Together, these benefits can improve operational efficiency and support more responsible use of agricultural chemicals.
Surface tension is the force that causes a liquid droplet to resist spreading. Water-based agricultural formulations often form rounded droplets because water has relatively high surface tension. When the droplet contacts a hydrophobic leaf, the liquid may not spread sufficiently, resulting in poor coverage and increased runoff.
Polyether-modified trisiloxane surfactants reduce the interfacial tension between the spray solution and the plant surface. The droplet can flatten and spread across a larger area, improving contact with the leaf. The reported surface tension of GT-1000 at a 0.1% concentration is less than 20.5 mN/m, demonstrating its strong wetting potential compared with untreated water-based systems.
Improved spreading is particularly important when the spray must cover narrow leaves, waxy foliage, vertical surfaces, or irregular plant structures. A more evenly distributed deposit can increase the probability that the active ingredient will contact the target area.
Wetting describes the ability of a liquid to make intimate contact with a solid surface. Good wetting allows a spray droplet to occupy more of the available leaf area rather than remaining as a bead. This can help reduce gaps between droplets and improve the uniformity of the spray deposit.
GT-1000 can be used to support improved wetting in spray solutions containing compatible herbicides, insecticides, fungicides, or foliar nutrients. Better wetting may be beneficial in crops with glossy leaves, thick cuticles, or dense canopies. It can also help when the target pest or pathogen is distributed unevenly across the crop surface.
Uniform coverage does not mean that every droplet must become extremely small or spread without limitation. Excessive spreading can sometimes increase the risk of runoff, drift, or crop sensitivity. For this reason, the optimum concentration should be selected according to the formulation, equipment, crop, weather conditions, and desired application result.
After a spray droplet reaches the leaf, it must remain in place long enough to dry or allow the active ingredient to be absorbed. Poor adhesion can cause droplets to bounce, slide, or run off. GT-1000 helps improve the contact between the spray solution and the plant surface, supporting stronger and more persistent deposition.
Improved adhesion is especially valuable in situations where foliage is difficult to wet or where the crop is exposed to light rainfall, irrigation, or overhead moisture soon after application. The product is described as helping improve resistance to rain wash-off and extending the duration of pest and disease control by more than 30% under suitable application conditions. Actual results depend on the active ingredient, rain intensity, drying time, crop type, application rate, and environmental conditions.
By helping the spray remain on the target surface, the adjuvant can reduce the loss of active ingredient caused by premature runoff. This may improve consistency between applications and help growers make better use of each spray operation.
Penetration is the movement of a pesticide or nutrient through the outer surface of a plant. Absorption is the subsequent uptake of the material into plant tissues. These processes are affected by the chemical properties of the active ingredient, the composition of the leaf cuticle, temperature, humidity, droplet drying, and the presence of suitable adjuvants.
GT-1000 supports penetration by increasing the contact area between the spray solution and the plant surface. Its silicone surfactant structure can also help the liquid move over microscopic surface irregularities. This creates more opportunities for the active ingredient to reach openings, cuticle pathways, or other sites through which uptake may occur.
Improved absorption can help the active ingredient become available to the target organism more efficiently. In herbicide applications, this may support better control of difficult weeds. In fungicide programs, improved coverage and uptake may help protect plant surfaces and tissues. In insecticide applications, more uniform deposits may increase the likelihood of contact with pests located on leaves or stems.
However, an adjuvant does not replace the biological function of the active ingredient. It cannot correct an unsuitable product choice, incorrect timing, inadequate dosage, or poor application technique. Its role is to help a compatible formulation perform closer to its intended potential.
One major advantage of organosilicon surfactants is their ability to produce strong wetting at relatively low use concentrations. Conventional nonionic surfactants can provide useful spreading, but they may require higher dosage levels to achieve a comparable reduction in surface tension. A low-use-rate silicone synergist may reduce the quantity of auxiliary material needed in the spray tank.
Lower dosage can provide practical advantages. It may reduce packaging and transportation requirements, simplify tank-mix calculations, and lower the amount of non-active material entering the field. The economic result depends on product pricing, recommended dosage, crop value, and the value of improved application performance.
Many agricultural targets are located on plant surfaces that are difficult to wet. Cabbage leaves, waxy fruit skins, narrow grasses, and mature foliage may repel water or cause droplets to remain isolated. A polyether-modified trisiloxane adjuvant can improve the spread of a compatible spray across these surfaces.
Compared with a basic water-based spray, the treated solution can produce a more continuous film or a more evenly distributed deposit. This is useful where the active ingredient must contact a large surface area, where pests are widely dispersed, or where pathogens develop in areas that are easily missed by irregular droplets.
GT-1000 is described as particularly useful when used with herbicides against persistent weeds such as reed and alligator weed. These weeds can be difficult to manage because of their vigorous growth, extensive root systems, waxy foliage, or ability to recover after incomplete treatment.
A silicone adjuvant can improve the distribution and uptake of an appropriate herbicide on the weed surface. More complete coverage may reduce the chance that untreated tissue survives and regenerates. Nevertheless, long-term management of persistent weeds normally requires an integrated program that considers herbicide selection, application timing, growth stage, mechanical control, water management, and resistance prevention.
When a spray is deposited and absorbed more effectively, the desired biological response may be achieved with fewer repeat applications. This can reduce labor, fuel use, equipment wear, and field traffic. It may also reduce the total quantity of pesticide released into the environment.
The product information indicates that improved adhesion and rainfastness may extend the duration of pest and disease control by more than 30% in suitable conditions. Such performance should be understood as application-dependent rather than universal. Growers should evaluate results through properly designed field comparisons and follow all product labels and regulatory requirements.
The product is also presented as a fertilizer efficiency enhancer. When used with compatible foliar fertilizers or soil-applied nutrient programs, it may improve wetting and distribution, helping the nutrient solution reach a larger area of the plant or soil interface. The supplied product information describes its use in supporting the delivery of nitrogen, phosphorus, and potassium toward plant roots by helping overcome soil absorption barriers.
Nutrient performance depends on soil texture, organic matter, pH, moisture, cation exchange capacity, fertilizer chemistry, root activity, and weather. Therefore, GT-1000 should be regarded as a supporting component rather than a replacement for balanced fertilization, soil testing, or proper irrigation management.
Field crops often involve large treated areas, limited application windows, and variable weather. Improving spray coverage can be valuable because a small percentage of untreated or poorly treated plants may affect total yield and crop uniformity. GT-1000 may be incorporated into compatible herbicide, fungicide, insecticide, or foliar nutrition programs for crops such as cereals, oilseeds, cotton, and other broad-acre crops.
In these systems, the adjuvant can help improve the deposition of spray droplets on leaves and stems while supporting more efficient use of application water. The final program should be optimized for nozzle type, spray volume, travel speed, wind conditions, and target location within the canopy.
Fruit and vegetable crops often have complex canopy structures and high commercial quality requirements. Uneven protection can create visible disease damage, insect injury, or irregular crop development. Improved wetting may help the spray reach leaf undersides, stems, fruit surfaces, and other difficult areas.
Because some horticultural crops are sensitive to surfactants, users should conduct crop safety testing before broad application. Concentration, temperature, humidity, crop growth stage, and tank-mix composition can all affect the risk of phytotoxicity. Applications during extreme heat or under stress conditions should be assessed carefully.
Cash crops frequently require high standards for appearance, yield, and quality. A more uniform spray deposit can help support consistent crop protection and may reduce the likelihood of re-treatment caused by incomplete coverage. The adjuvant may be useful in programs where the value of improved control justifies additional formulation management.
For high-value crops, small-scale testing is especially important. Growers can compare treated and untreated sections, record weather conditions, assess visible coverage, and measure pest or disease outcomes. This approach helps determine the most suitable use rate for local conditions.
Protected cultivation systems have unique spray conditions. Humidity may be high, air movement may be limited, and crop leaves can be densely arranged. Improved wetting may help reach hidden plant surfaces, but excessive spreading or slow drying may increase the risk of residue or disease problems.
Before use in greenhouses, the operator should confirm compatibility with the pesticide, crop, irrigation system, and ventilation conditions. Small-area trials and careful observation are recommended.
The manufacturer operates as a high-tech new materials enterprise integrating research and development, production, and sales. This integrated structure supports a direct connection between laboratory design and commercial product manufacture. Agricultural silicone adjuvants must be developed with both chemical performance and practical application in mind. Laboratory surface-tension data alone are not enough; the product must also demonstrate suitable handling, dispersion, stability, compatibility, and crop-use potential.
An integrated technical team can evaluate silicone structure, polyether modification, viscosity, cloud point, pH, and active content together. This makes it possible to adjust the product for different application objectives, such as wetting, spreading, adhesion, penetration, or compatibility with a particular formulation type.
Consistent silicone materials require controlled raw-material feeding, accurate reaction conditions, effective mixing, appropriate temperature management, and reliable filtration or purification procedures. The company reports the use of internationally advanced production equipment and precise testing facilities to support stable quality and supply.
Production equipment is important because small changes in reaction conditions can influence molecular distribution, viscosity, surface activity, cloud point, and compatibility. A controlled manufacturing system helps reduce batch-to-batch variation and makes the product more dependable for formulators and agricultural users.
The company has established a quality-monitoring mechanism covering the process from production source to finished-product delivery. Such a system may include incoming raw-material inspection, process parameter monitoring, intermediate testing, finished-product analysis, packaging checks, and shipment documentation.
For GT-1000, key quality indicators include purity, viscosity, surface tension, cloud point, and pH. These properties are directly related to performance. A material with inconsistent surface tension may produce variable spreading. A change in viscosity can affect pumping, metering, and dispersion. An unsuitable cloud point may influence stability under changing temperature conditions. An inappropriate pH can affect compatibility with certain tank mixtures.
| Quality factor | Why it matters in application | GT-1000 reference value |
|---|---|---|
| Purity | Supports predictable physical and surface-active behavior | 99.8% |
| Viscosity | Affects handling, pumping, dosing, and mixing | 30–50 mm²/s at 25°C |
| Surface tension | Indicates wetting and spreading potential | Less than 20.5 mN/m at 0.1% by weight |
| Cloud point | Provides information about temperature-related solution behavior | Not more than 35°C at 1.0% by weight |
| pH | Helps evaluate aqueous-system compatibility | 6.5–7.5 at 1% solution and 25°C |
Specialized personnel are essential for the manufacture of organosilicon materials. Operators must understand process control, equipment conditions, sampling procedures, and safety requirements. Laboratory personnel must be able to measure surface tension, viscosity, pH, purity, and other relevant parameters accurately. Technical staff must also understand how the product behaves in agricultural formulations.
The manufacturer reports an experienced technical and production team with professional capabilities. This human expertise complements the equipment and quality system, helping the company maintain stable production and respond to customer requirements.
Different pesticide manufacturers and agricultural input suppliers may require different adjuvant characteristics. Some customers may need a standard agricultural silicone synergist, while others may require customized viscosity, concentration, packaging, compatibility, or branding arrangements.
The company accepts OEM and ODM orders, allowing customers to discuss product specifications, packaging formats, application fields, and supply volumes. Custom development should be supported by technical evaluation, compatibility testing, stability studies, and clear quality specifications before commercial production.
An adjuvant should not be assumed to be compatible with every pesticide or fertilizer. Compatibility depends on the active ingredient, solvent system, emulsifier package, salts, water hardness, pH, temperature, and mixing order. A product that performs well in one formulation may produce cloudiness, separation, excessive foam, or precipitation in another.
Before tank mixing, users should read the pesticide and adjuvant labels, confirm the recommended order of addition, and perform a jar test using the same water source planned for field application. The jar test should be observed for separation, sediment, gel formation, excessive heat, or other signs of incompatibility.
A commonly used mixing sequence is to fill the spray tank partly with clean water, begin agitation, add water conditioners or compatibility agents if required, add dry products, add suspension concentrates, add emulsifiable concentrates or soluble concentrates according to label guidance, and add the adjuvant at the recommended stage. The exact order must follow the instructions for the specific formulation.
Users should avoid mixing concentrated components directly together unless the product instructions specifically permit it. Adequate agitation should be maintained throughout preparation and application. If a mixture remains unstable in the jar test, it should not be applied without further technical evaluation.
Before selecting an adjuvant rate, define the desired outcome. The objective may be better wetting, greater coverage, stronger adhesion, improved rainfastness, enhanced penetration, reduced runoff, or improved fertilizer distribution. Different objectives may require different concentrations and application methods.
Crop safety is a central consideration. Young leaves, tender fruit, stressed plants, and plants exposed to high temperatures may be more sensitive to surfactants. A product that is safe at one rate may cause injury at a higher rate or under unfavorable conditions.
Users should test the intended mixture on a small area before treating the entire crop. The treated area should be observed for several days for spotting, burn, curling, discoloration, or abnormal growth. The trial should represent the actual crop stage and environmental conditions as closely as possible.
GT-1000 can improve the behavior of spray droplets, but it cannot compensate for unsuitable application equipment. Nozzle selection, pressure, spray volume, boom height, travel speed, and droplet classification should be selected according to the target and product label.
Very large droplets may provide inadequate coverage, while very fine droplets may be vulnerable to drift and evaporation. The use of a silicone surfactant should be integrated into a complete spray-management plan rather than treated as a substitute for correct equipment calibration.
Wind, temperature, humidity, and rainfall affect application results. Spraying during excessive wind can increase drift. High temperatures and low humidity can accelerate drying. Rain soon after application may reduce performance, even when the adjuvant improves resistance to wash-off. Applications should be timed according to the requirements of the active ingredient and local weather forecast.
Accurate measurement is important because overuse does not necessarily produce better performance. Excessive surfactant can increase runoff, foam, crop sensitivity, or formulation instability. The recommended range should be confirmed through product documentation, technical consultation, and field testing.
Efficient agricultural application is closely connected with environmental responsibility. When a spray solution provides more complete coverage and improved uptake, growers may be able to reduce repeat applications or avoid unnecessary increases in active-ingredient dosage. This can reduce fuel consumption, labor requirements, equipment use, and the risk of pesticide loss to soil and water.
GT-1000 is described as having a biocompatible formulation intended to reduce damage to crops and soil when used correctly. The practical environmental profile of any adjuvant depends on its composition, dosage, degradation behavior, tank mixture, application method, and local regulatory assessment. Responsible use requires adherence to label instructions, buffer zones, personal protective equipment requirements, storage rules, and disposal procedures.
Better fertilizer distribution may also support resource efficiency. If nutrients are delivered more effectively to the root zone or plant surface, less material may be lost through runoff, immobilization, or uneven application. This does not eliminate the need for soil testing and nutrient management, but it can complement a well-designed fertilization program.
Sustainable agriculture is not achieved by a single additive. It depends on integrated pest management, crop rotation, resistant varieties, biological control, accurate scouting, precision application, balanced fertilization, and protection of soil and water resources. An effective adjuvant can contribute to this system by helping each approved agricultural input perform more efficiently.
GT-1000 offers potential value not only to growers but also to pesticide formulators, fertilizer manufacturers, agricultural distributors, and private-label suppliers. Its defined physical parameters make it easier to evaluate during product development and quality control. The documented chemical identity and performance indicators can support internal formulation work and customer technical files.
Formulators may use the product as a wetting and spreading component in agricultural concentrates or as a tank-mix adjuvant. Its moderate viscosity can facilitate handling and metering, while its near-neutral pH may simplify compatibility assessment with many water-based systems. The exact formulation role must be established through laboratory trials.
Distributors can benefit from a product that addresses several common agricultural challenges, including poor wetting, uneven coverage, runoff, and insufficient penetration. Its application range across field crops, fruits, vegetables, and cash crops may support a broad market position, subject to local registration and labeling requirements.
OEM and ODM support can further help customers develop differentiated products. Customized packaging, private labeling, technical documentation, and application guidance can be discussed according to project requirements. Stable supply is particularly important for agricultural input manufacturers, whose production schedules are often linked to seasonal demand.
Hebei Guituo New Material Co., Ltd. is presented as a professional new-materials enterprise with substantial experience in the development and manufacture of silicone-based products. Its product matrix includes silicone additives, wetting agents, modified silicone oils, dimethyl silicone oils, surfactants, defoamers, and other related materials.
The company serves multiple industries, including agriculture, daily chemicals, electronics, textiles, and industrial manufacturing. This cross-industry experience can support the development of materials with controlled surface activity, spreading behavior, foam management, compatibility, and stability.
The company reports that its agricultural silicone products have reached an advanced domestic level and have been selected by leading domestic agrochemical enterprises as designated procurement products. It also exports products to overseas markets, including Europe and Southeast Asia, where stable performance and reliable quality are important purchasing criteria.
A broad customer base can encourage continuous improvement in production management, technical support, documentation, and supply-chain coordination. For overseas customers, clear specifications, export packaging, communication support, and consistent batch quality are particularly important when products are incorporated into regulated agricultural formulations.
Ningbo Guituo Trading Co., Ltd. functions as a subsidiary and trading channel associated with the manufacturing group. Together, the manufacturing and trading operations provide a structure for product supply, international communication, customer service, and customized order coordination.
Traditional nonionic surfactants, oils, stickers, and humectants each have important roles in agricultural formulations. They may be selected for their cost, compatibility, retention, or specific effects on evaporation and coverage. However, their performance characteristics are not identical to those of polyether-modified trisiloxane surfactants.
A silicone-based adjuvant generally provides stronger surface-tension reduction and faster spreading than many conventional surfactants. This can be advantageous when the crop has highly hydrophobic foliage or when rapid coverage is required. A non-silicone product may still be preferable in applications where prolonged retention, oil compatibility, or a particular crop-safety profile is more important.
The main competitive advantage of GT-1000 is therefore not that it replaces every other adjuvant, but that it offers a strong combination of low surface tension, spreading efficiency, penetration support, adhesion improvement, and broad agricultural applicability. Product selection should always be based on the specific crop, active ingredient, climate, equipment, and performance target.
| Performance consideration | Potential contribution of GT-1000 | Practical significance |
|---|---|---|
| Wetting | Reduces surface tension and improves contact | Helps droplets spread over difficult leaf surfaces |
| Coverage | Promotes more uniform distribution | May reduce untreated areas within the spray zone |
| Adhesion | Supports stronger retention on plant surfaces | May reduce losses from runoff and light rainfall |
| Penetration | Improves contact with plant surface barriers | Can support more efficient active-ingredient uptake |
| Application efficiency | May improve performance of compatible formulations | Can contribute to fewer repeat treatments |
| Manufacturing consistency | Controlled specifications and quality monitoring | Supports predictable formulation and field performance |
GT-1000 should be stored in its original, properly sealed container in a cool, dry, and well-ventilated area. Containers should be protected from excessive heat, freezing conditions, direct sunlight, and contamination. Storage requirements should be confirmed through the current safety data sheet and product documentation.
Before use, the material should be inspected for unusual separation, discoloration, sediment, or changes in appearance. If a storage issue is suspected, the product should be evaluated by qualified technical personnel before being added to a formulation or spray tank.
Operators should use appropriate personal protective equipment and follow workplace chemical-handling procedures. Spills should be contained and collected according to local regulations. Empty packaging should not be reused for food, water, feed, or unrelated materials.
For commercial formulators, retained samples and batch records can help trace product performance. It is useful to record the batch number, date of receipt, storage conditions, formulation composition, mixing order, and application results. These records support quality assurance and help identify the cause of any unexpected outcome.
A structured evaluation program can help determine whether GT-1000 is suitable for a particular crop protection or fertilizer application. The first stage is laboratory screening. Measure surface tension, appearance, dispersion, foam, pH, and stability when the adjuvant is mixed with the proposed formulation and local water source.
The second stage is a small-scale crop-safety test. Apply several concentrations to a limited number of plants representing the intended growth stage. Include an untreated comparison and, where appropriate, a standard commercial adjuvant. Observe the crop for visible injury and record environmental conditions.
The third stage is a performance test. Compare spray coverage, retention after drying, rainfastness, pest or disease control, weed suppression, or nutrient-response indicators. The test should be replicated when possible and evaluated over an appropriate period.
The fourth stage is operational validation. Confirm that the mixture can be prepared easily, remains stable during the application window, passes through the equipment without clogging, produces acceptable foam, and can be applied at the desired speed and spray volume.
This approach helps distinguish the chemical potential of the adjuvant from the performance of the full application system. It also creates practical information for product labels, distributor training, and grower recommendations.
GT-1000 is a high-efficiency agricultural silicone adjuvant and surfactant based on polyether-modified trisiloxane. It is designed to improve wetting, spreading, adhesion, penetration, and absorption in compatible agricultural spray solutions.
The main benefit is improved spray behavior. By reducing surface tension, the product can help droplets spread more evenly across plant surfaces, improve contact with waxy leaves, reduce uneven coverage, and support more efficient uptake of compatible active ingredients.
It can be used with compatible herbicides according to product instructions and local regulations. The supplied information specifically identifies potential value in improving the control of persistent weeds such as reed and alligator weed. A jar test, crop-safety test, and small field trial are recommended before broad use.
GT-1000 is intended for broad agricultural application and may be suitable for compatible fungicide and insecticide programs. Compatibility varies by formulation, so users should verify the label, conduct a jar test, and follow the instructions of the active-ingredient manufacturer.
The product is designed to improve adhesion and resistance to rain wash-off. The degree of improvement depends on the active ingredient, drying time, rainfall intensity, crop surface, application rate, and environmental conditions. It should not be regarded as a guarantee against wash-off under heavy or immediate rainfall.
By improving coverage, adhesion, and uptake, an adjuvant may help a compatible pesticide work more efficiently and may reduce the need for repeat applications. However, users must not automatically reduce the registered pesticide rate. Any rate adjustment must comply with product labels, local regulations, technical recommendations, and validated field data.
It may be applicable to field crops, fruits, vegetables, and cash crops, but crop sensitivity varies. Tender leaves, stressed plants, high temperatures, and concentrated mixtures can increase the risk of phytotoxicity. Small-area crop-safety testing is recommended.
The product is described as supporting fertilizer efficiency and nutrient delivery. It may be evaluated with compatible foliar fertilizers or soil-applied nutrient programs. The correct use rate and mixing procedure should be established through testing because fertilizer salts and pH can influence compatibility.
The cloud point provides information about the temperature at which a surfactant solution may begin to show changes in clarity or phase behavior under specified test conditions. GT-1000 has a cloud point of not more than 35°C at a 1.0% concentration. Actual behavior depends on concentration, water quality, and the other materials in the formulation.
The pH value of a 1% aqueous solution at 25°C is specified as 6.5–7.5. This near-neutral range can be useful during compatibility evaluation, although the pH of a complete tank mixture may change significantly after other products are added.
Perform a jar test using the same water and product ratios planned for field use. Add the components in the recommended order, maintain agitation, and observe the mixture for separation, precipitation, gel formation, excessive foam, or heat generation. If instability appears, seek technical guidance before application.
The company accepts OEM and ODM orders. Customers can discuss customized specifications, packaging, private labeling, application requirements, and supply arrangements with the technical and commercial teams.
The manufacturer reports advanced production equipment, precise testing facilities, full-process quality monitoring, and experienced technical and production personnel. These capabilities support control of purity, viscosity, surface tension, cloud point, pH, and other important properties.
The product is described as having a biocompatible formulation and as supporting reduced pesticide use through improved efficiency. Environmental performance still depends on dosage, formulation, application practice, degradation, local regulations, and responsible handling. Users should follow all safety and environmental requirements.
Customers should provide the intended application, target crop, active ingredient or fertilizer type, required product quantity, packaging preference, destination market, technical specification, and whether OEM or ODM service is required. This information helps the supplier recommend an appropriate product and prepare accurate commercial documentation.
GT-1000 is a high-efficiency agricultural silicone adjuvant developed to address several of the most common limitations in spray application. Its polyether-modified trisiloxane chemistry provides strong surface activity, while its low surface-tension specification supports improved wetting and spreading. By helping droplets cover plant surfaces more evenly and remain attached for longer, the product can contribute to better penetration, absorption, rainfastness, and overall application efficiency.
The product is suitable for evaluation in herbicide, fungicide, insecticide, foliar fertilizer, and other agricultural programs where improved spray performance is required. Its potential advantages include better coverage of difficult leaf surfaces, improved adhesion, more efficient use of compatible active ingredients, and support for reduced repeat applications.
Its competitive value is strengthened by the manufacturing capabilities of Hebei Guituo New Material Co., Ltd. The company combines research and development, advanced production equipment, precise testing, full-process quality monitoring, experienced personnel, a broad silicone-product portfolio, and OEM and ODM services. These strengths provide a foundation for stable supply and application-oriented customization.
For best results, GT-1000 should be evaluated as part of a complete agricultural application system. Correct dosage, compatible tank mixing, suitable equipment, crop-safety testing, weather awareness, and compliance with product labels remain essential. Used responsibly, a high-performance silicone adjuvant can help growers and formulators make better use of agricultural inputs while supporting more efficient and sustainable crop production.
1. Product specification information for GT-1000 agricultural silicone adjuvant, including purity, viscosity, surface tension, cloud point, and pH data.
2. General principles of agricultural spray technology, including droplet formation, surface tension, wetting, adhesion, evaporation, and runoff.
3. Technical literature on polyether-modified trisiloxane surfactants and their use in pesticide and fertilizer formulations.
4. Integrated pest management principles concerning efficient pesticide use, resistance prevention, crop monitoring, and environmental protection.
5. General guidance on pesticide tank mixing, jar testing, crop-safety evaluation, equipment calibration, and responsible application.
6. Manufacturer information regarding organosilicon additives, surfactants, modified silicone oils, defoamers, OEM services, ODM services, and quality-control systems.
7. General agricultural formulation practices for compatibility testing, storage, handling, documentation, and batch-quality management.