2026-10-31

Foam is a common process challenge in chemical manufacturing, agriculture, paper production, coatings, food processing, textile treatment, pharmaceutical manufacturing, and many other industrial operations. It can appear during mixing, pumping, filtration, washing, extraction, distillation, evaporation, dehydration, drying, filling, and circulation. Although foam may look harmless, excessive foam can reduce equipment capacity, interrupt continuous production, increase material loss, cause inaccurate filling, and affect the appearance and quality of finished products.
Organosilicone defoamer is designed to control this problem efficiently. Based on silicone oil, modified silicone oil, emulsifying components, and functional additives, it combines low surface tension with controlled spreading behavior. These characteristics allow it to penetrate, weaken, and break unstable foam films. When correctly matched to a formulation, the defoamer can suppress foam quickly while maintaining the physical stability, appearance, and functional performance of the host system.
LD-610 organosilicon defoamer is a white viscous emulsion developed for industrial foam-control applications. It is identified as a polydimethylsiloxane emulsion and is supplied as a silicone-based auxiliary material for diverse production systems. Its formulation emphasizes stable physical properties, strong defoaming performance, compatibility, and adaptability to different processing environments. It can be used in water-based formulations and can also be evaluated for specialized systems containing surfactants, wetting agents, active ingredients, or other process chemicals.
Hebei Guituo New Material Co., Ltd. supports the product with silicone-material research, production capabilities, testing facilities, and application-oriented formulation development. The company’s product matrix includes silicone additives, agricultural silicone products, wetting agents, modified silicone oils, dimethyl silicone oils, surfactants, and defoamers. This integrated technical background helps connect defoamer design with the actual requirements of agricultural, daily chemical, electronic, textile, and industrial formulations.
Foam consists of gas bubbles surrounded by liquid films. These films may be stabilized by surfactants, polymers, proteins, fine particles, active ingredients, or other surface-active materials. Mechanical agitation, high-speed pumping, air entrainment, and temperature changes can further promote foam generation. Once a stable foam layer develops, it may remain on the surface of the liquid or circulate through the equipment.
In production equipment, foam occupies volume without contributing to the useful capacity of the vessel. A tank that appears full may contain a considerable amount of air-filled foam rather than liquid. This can limit batch size, trigger overflow, reduce the accuracy of dosing systems, and create difficulties during transfer and packaging. In continuous operations, foam can also affect residence time and interfere with sensors, filters, separators, and discharge lines.
Organosilicone defoamers address these issues through a combination of spreading, penetration, and film disruption. Silicone-based materials generally have low surface tension compared with many aqueous process liquids. When a properly formulated defoamer reaches a foam film, it can spread across the interface, reduce local film strength, and encourage bubble coalescence. The bubbles then collapse, allowing the liquid to return to the main process phase.
The objective is not simply to make foam disappear visually. A high-quality defoamer should provide rapid knockdown, persistent control during continued agitation, and suitable compatibility with the final formulation. It should not create excessive oil spots, sedimentation, haze, surface defects, separation, or unwanted changes in viscosity. The correct product therefore depends on both defoaming strength and system compatibility.
| Item | Specification |
|---|---|
| Product model | LD-610 |
| Product name | Organosilicon Defoamer |
| Product type | Silicone-based foam-control emulsion |
| Synonym | Polydimethylsiloxane Emulsion |
| CAS number | 9016-00-6 |
| EINECS number | 618-493-1 |
| Purity stated for the product | 99.8% |
| Physical appearance | White viscous emulsion |
| Main functional role | Foam suppression and process stabilization |
| Primary application category | Chemical raw materials and industrial additives |
The product is supplied as a white viscous emulsion, a form that is especially useful for water-based processing environments. Its emulsion structure allows the silicone phase to be distributed through a continuous aqueous phase when incorporated under appropriate mixing conditions. The exact addition method, dosage, and pre-dilution procedure should be selected according to the formulation, equipment, foam intensity, and required persistence.
The listed purity of 99.8% provides a clear reference for product identification and quality communication. In practical application, however, users should assess the complete formulation behavior rather than relying on a single specification. Foam-control performance is affected by the concentration of silicone components, emulsifier selection, particle distribution, viscosity, storage history, system polarity, surfactant concentration, and processing conditions.
LD-610 is positioned as a versatile organosilicon defoamer for customers seeking a balance between strong foam suppression and formulation compatibility. It is suitable for evaluation in agricultural formulations, daily chemical products, textile processes, coatings, chemical manufacturing, and other systems where foam can reduce production efficiency or finished-product quality.
The first important characteristic of silicone-based defoamers is their low surface tension. Compared with many water-based process liquids, silicone oils can spread readily across liquid-air interfaces. This allows a small quantity of defoamer to move toward the foam film and interact with the bubble surface.
Effective spreading must be controlled. If a defoamer spreads too aggressively or is poorly matched to the formulation, it may produce visible surface defects, oil spots, craters, or unwanted changes in coating appearance. A balanced formulation therefore uses silicone oil, modified silicone components, and supporting additives to provide sufficient foam-breaking activity without excessive surface disruption.
Foam films are often stabilized by surfactants and other surface-active substances. These materials lower surface tension and create elastic or viscous layers around gas bubbles. The defoamer must enter or disturb this layer to weaken the bubble structure. Its droplets or dispersed particles can move through the liquid phase and reach the gas-liquid interface.
Once the defoamer contacts the foam film, it can create regions with different interfacial properties. These weak points encourage thinning and rupture. Neighboring bubbles then merge, and the foam layer collapses. The process may be rapid when the formulation is well matched, although repeated agitation or continuous air entrainment may require persistent foam control.
A defoamer may be used to remove foam that has already formed, while an antifoam is often added in advance to prevent or limit foam generation. Organosilicone products can provide both types of behavior depending on their formulation and addition point. Early addition may reduce foam formation during mixing, while post-addition can provide quick knockdown when an unexpected foam layer appears.
For industrial users, the most valuable performance is often a combination of immediate effect and lasting control. A product that breaks foam once but loses effectiveness under continued shear may not be sufficient for a high-speed process. Conversely, a persistent product that is difficult to disperse may affect appearance or create deposits. LD-610 is designed for evaluation across these practical requirements.
Silicone materials are widely recognized for their efficient interfacial activity. Because silicone oil can spread effectively at the gas-liquid interface, a relatively small amount may influence a large foam surface. This can help reduce consumption compared with some conventional mineral-oil or organic-based products, although the optimum dosage must always be determined through application testing.
Lower use levels can provide several benefits. They may reduce the contribution of the defoamer to total formulation cost, limit the potential effect on color and odor, and simplify downstream processing. In agricultural and industrial systems, reduced additive loading may also help preserve the intended balance between active ingredients, wetting agents, dispersants, and other auxiliaries.
One of the main reasons users select organosilicone defoamers is fast action. During mixing, foam can rise within seconds, especially in formulations containing surfactants or when powder materials are added to liquid. Rapid foam knockdown allows the operator to continue production without waiting for natural foam collapse.
Fast action is especially useful in vessels with limited headspace, high-speed dispersers, transfer lines, filling equipment, and recirculation systems. By controlling foam near the point of generation, the defoamer can reduce overflow risks and make the process easier to monitor.
Organosilicone defoamers can be formulated for different media, including water-based systems and selected oil-based or solvent-containing systems. Modified silicone oils and carefully selected emulsifiers can improve compatibility in complex formulations. The compatibility target is not identical for every product: a clear detergent, a suspension concentrate, a textile bath, and an industrial coating may require different defoamer properties.
LD-610 benefits from a formulation approach that considers silicone oil structure, emulsification, dispersion stability, and interaction with other surface-active materials. This makes it suitable for compatibility screening across several industries rather than restricting it to one narrow process.
A defoamer must remain physically stable during storage, transport, dilution, and application. Layering, sedimentation, irreversible separation, or excessive viscosity change can make dosing inconsistent. A stable emulsion supports more reliable use and reduces the need for repeated correction during production.
The product is described as having stable physical properties and a strong defoaming effect. Users should still store it according to the supplier’s technical recommendations and agitate or homogenize it when necessary before use. Stability should be confirmed under actual storage temperatures and in the presence of the intended formulation components.
High-surfactant formulations are among the most difficult environments for foam control because surfactants stabilize bubble films. A conventional defoamer may lose effectiveness when the surfactant concentration increases or when the system contains several wetting agents with different hydrophilic-lipophilic balances.
Organosilicone defoamers can maintain useful activity because their interfacial behavior differs from that of many conventional organic additives. A properly designed silicone emulsion can enter the foam structure while remaining sufficiently compatible with the surrounding liquid. The performance depends on molecular structure, droplet size, emulsifier system, viscosity, and dosage, so laboratory screening remains important.
The performance of a defoamer begins with formulation design but depends equally on manufacturing discipline. Hebei Guituo New Material Co., Ltd. is described as a high-technology enterprise integrating research and development, production, and sales. This integrated structure supports the development of silicone materials according to specific industrial and agricultural requirements.
The company focuses on the development and application of high-end silicone materials in industrial and agricultural fields. Its portfolio covers silicone additives, wetting agents, modified silicone oil, dimethyl silicone oil, surfactants, and defoamers. This breadth is valuable because foam-control performance is closely related to the behavior of other additives in the system.
For example, an agricultural formulation may contain a silicone wetting agent, a dispersant, an active ingredient, and a defoamer. If these components are designed independently, they may compete at the interface or disturb one another’s performance. A supplier with experience in several related product categories can evaluate the interactions more systematically and develop a more balanced solution.
The company has established production capability supported by internationally advanced equipment and precise testing facilities. In silicone emulsion manufacturing, equipment quality can influence mixing efficiency, dispersion uniformity, temperature control, shear history, and batch-to-batch consistency. These factors directly affect droplet distribution, physical stability, and foam-control behavior.
Controlled processing is especially important when producing a viscous emulsion. Excessive shear may alter the emulsion structure or create undesirable instability, while insufficient mixing may produce nonuniform distribution of silicone components. Appropriate equipment allows the manufacturer to control these variables and repeat the intended formulation process more accurately.
The company reports a full-process quality-monitoring mechanism from production source to finished-product delivery. Such a mechanism can include raw-material inspection, process parameter control, intermediate sampling, appearance evaluation, viscosity monitoring, stability observation, packaging inspection, and final batch release.
For customers, full-process quality management helps reduce variation between shipments. Consistent defoamer quality makes it easier to establish production recipes, set dosing levels, validate application performance, and maintain finished-product standards. It also supports more efficient troubleshooting when a formulation changes.
Silicone defoamer development requires more than simple ingredient blending. Technical personnel need to understand interfacial chemistry, emulsion behavior, process shear, storage stability, and application-specific requirements. Production teams must translate the laboratory formula into a repeatable industrial process.
Hebei Guituo New Material Co., Ltd. has assembled technical and production personnel with professional experience in silicone materials and related auxiliaries. This combination supports the transition from formulation concept to commercial batch while maintaining attention to quality, supply stability, and customer application needs.
Different industries may require different defoaming profiles. Some customers need immediate foam knockdown, while others prioritize long-term suppression under high shear. A water-based agricultural suspension may need a different emulsion structure from a textile bath or a coating system. OEM and ODM services allow product development to be adjusted according to customer requirements, processing conditions, packaging preferences, or application targets.
Customization may involve silicone oil viscosity, modified silicone structure, emulsifier selection, solids content, dispersion behavior, and compatibility requirements. Any customized product should be validated through laboratory testing, pilot-scale evaluation, and production trials before full-scale adoption.

Organosilicone Defoamer
Water-based systems are among the most common application environments for silicone defoamers. They include agricultural suspensions, emulsions, soluble concentrates, detergents, cleaners, coatings, paper-processing liquids, textile baths, and many chemical production streams.
In these systems, the defoamer should disperse efficiently without forming visible oil spots or causing phase separation. The emulsifier system is therefore critical. A suitable emulsifier helps distribute the silicone phase through water and supports storage stability. The defoamer should remain available to attack foam but should not destabilize the complete formulation.
Mixing order can influence performance. Adding the defoamer at the beginning may help prevent foam during processing, while adding a portion at the end may provide final foam correction. In some formulations, pre-dilution with a compatible liquid improves distribution. Users should test both the addition point and the mixing intensity because excessive shear can sometimes disperse the defoamer so finely that immediate defoaming activity decreases.
Detergents, cleaning products, agricultural formulations, and some textile chemicals may contain significant levels of surfactants. These surfactants stabilize foam by reducing surface tension and forming organized interfacial layers. A defoamer must therefore overcome a strong foam-stabilizing environment.
The best approach is to balance spreading power with compatibility. A product that is too weak may not break the foam, while a product that is too incompatible may cause surface defects or separation. Organosilicone technology offers a useful platform because silicone components can provide strong interfacial activity at low concentration. The final result depends on the complete formulation and should be confirmed by repeated agitation and storage tests.
| System type | Main compatibility focus | Desired behavior |
|---|---|---|
| Water-based formulation | Dispersion and storage stability | Uniform distribution without layering |
| High-surfactant system | Balance between foam suppression and formulation integrity | Strong foam control without destabilization |
| Low-surfactant system | Spreading control and surface appearance | Reduced surface defects and controlled activity |
| Agricultural formulation | Compatibility with active ingredients and wetting agents | Stable performance without reduced application efficacy |
| Textile processing bath | Uniform distribution and fabric-surface behavior | Effective foam control without uneven treatment |
Oil-based and solvent-containing systems have different polarity and solubility characteristics from aqueous formulations. A defoamer that performs well in water may not automatically be appropriate for a nonpolar or semi-polar medium. In these systems, modified silicone oils may be used to improve solubility, dispersion, or phase compatibility.
Compatibility is particularly important in coatings, electronics processing, textile treatment, and specialty chemical production. An incompatible defoamer may produce craters, fish eyes, haze, poor leveling, or uneven surface properties. Therefore, the supplier and customer should consider the solvent type, resin chemistry, pigment concentration, shear conditions, and curing process when selecting a silicone defoamer.
LD-610 is primarily presented as a silicone-based emulsion, making water-based applications a natural area for evaluation. For solvent-rich systems, customers should request application guidance and conduct specific compatibility studies rather than assuming that the aqueous emulsion is suitable without modification.
Agricultural formulations can generate foam during the addition of powders, wetting, dispersion, recirculation, and filling. They may contain active ingredients, dispersants, emulsifiers, wetting agents, thickeners, salts, and other components. These materials can interact in complex ways, and the defoamer must control foam without reducing the stability or intended function of the formulation.
In suspension concentrates, foam may interfere with milling, circulation, and filling. In emulsifiable or water-dispersible products, foam can affect tank preparation and accurate measurement. In foliar spray solutions, excessive foam may complicate transfer and application. A compatible organosilicone defoamer can improve handling by reducing foam at the manufacturing stage and, where appropriate, during dilution or application preparation.
Hebei Guituo New Material Co., Ltd. supplies agricultural silicone products used by domestic agrochemical enterprises. Its experience with agricultural wetting agents and silicone additives supports the evaluation of defoamer compatibility within multi-component agricultural systems. The correct product and dosage should be determined using the customer’s actual active ingredient, water quality, mixing procedure, and storage conditions.
Chemical production frequently involves reactions, neutralization, dilution, agitation, gas release, and transfer. Foam can reduce reactor capacity and make it difficult to observe the process. It can also interfere with filtration, separation, evaporation, and discharge.
Organosilicone defoamer can be added at a controlled stage to maintain usable headspace and improve process continuity. Its stable physical behavior and strong interfacial activity make it suitable for screening in various chemical process liquids. The dosage should be optimized to avoid affecting downstream purification or product properties.
Paper and pulp systems often contain fibers, fillers, surfactants, sizing materials, and dissolved organic substances. High-speed pumps and air entrainment can generate persistent foam. Foam may cause uneven formation, reduced equipment efficiency, and difficulties in drainage or coating operations.
A suitable silicone defoamer can help reduce foam during pulp preparation, coating, wastewater handling, and related process steps. Compatibility with paper-surface properties, printability, absorbency, and subsequent finishing operations should be examined before adoption.
Foam can be introduced during pigment dispersion, high-speed mixing, pumping, and application. In coatings, trapped air may produce pinholes, craters, poor leveling, or an uneven film. In inks, foam can interfere with filling, printing uniformity, and color consistency.
Defoamer selection in coatings and inks requires careful balance. Strong foam suppression is necessary, but excessive incompatibility can create surface defects. Silicone oil structure, compatibility with the resin, pigment type, solvent system, and curing method all influence performance.
Foam can affect filling accuracy, vessel capacity, filtration, fermentation-related processing, washing, and liquid transfer. In food and pharmaceutical environments, the defoamer must be selected according to applicable regulatory, quality, and process requirements. Customers should verify that the intended grade and use level comply with the standards governing their specific application.
The physical stability of a defoamer is particularly important where consistent dosing and clean processing are required. Any product used in these sectors should be evaluated for purity, documentation, compatibility, and process-specific acceptance.
Textile baths can generate foam during wetting, washing, dyeing, finishing, and circulation. Foam may cause uneven treatment, reduce bath capacity, and interfere with pumps or dosing equipment. Organosilicone defoamers can be evaluated for use where rapid foam reduction is needed without adversely affecting fabric hand, appearance, absorbency, or subsequent finishing.
Electronic manufacturing and precision cleaning processes may use water-based or solvent-containing liquids. Foam can interfere with spray systems, immersion tanks, filtration, and surface treatment. In these applications, low residue, compatibility, and control of surface effects are critical. Modified silicone technologies may be considered where the process requires a specific balance between foam suppression and surface behavior.
The correct dosage depends on the foam intensity, formulation composition, equipment design, operating temperature, agitation speed, air entrainment, and required persistence. There is no universal dosage that can guarantee the same result in every system. A practical evaluation should begin with a small laboratory sample and progress to pilot or production trials.
Users should first identify when and where foam is generated. If foam appears mainly during powder addition, the defoamer may be introduced before or during that stage. If foam develops during high-speed homogenization, a controlled pre-addition or split addition may be appropriate. If foam appears during filling, a small late-stage addition may be more effective than adding the entire amount at the beginning.
Mixing conditions should also be recorded. Excessive shear can distribute the defoamer too finely and reduce its ability to destabilize foam films immediately. Insufficient mixing can create localized high concentrations and uneven foam control. The best procedure normally provides enough agitation for uniform distribution without unnecessarily changing the emulsion structure.
Pre-dilution may improve handling in some water-based systems, but the diluent must be compatible and the diluted product should be used within a suitable period. Long storage after dilution may reduce stability. Customers should also avoid combining the defoamer with incompatible chemicals before addition to the main batch.
| Evaluation step | Recommended observation | Purpose |
|---|---|---|
| Initial appearance | Color, viscosity, uniformity, and signs of separation | Confirm product condition before use |
| Small-scale foam test | Foam height, collapse time, and residual foam | Estimate initial activity |
| Repeated agitation test | Foam recurrence after multiple mixing cycles | Assess persistence |
| Compatibility test | Oil spots, haze, sedimentation, or viscosity change | Check formulation integrity |
| Storage test | Appearance and performance after storage | Evaluate long-term stability |
| Production trial | Equipment behavior and finished-product quality | Confirm industrial suitability |
Visual inspection is a simple but valuable first step. A compatible defoamer should not create obvious oil spots, severe haze, layering, floating particles, or rapid sedimentation in the tested formulation. Samples should be observed immediately after mixing and again after standing under defined conditions.
Foam knockdown can be assessed by measuring the time required for a defined foam layer to collapse after defoamer addition. The test should use a repeatable agitation method, container size, liquid volume, temperature, and defoamer dosage. Comparing several products under identical conditions provides more meaningful data than relying on visual impressions from different tests.
Some systems generate foam continuously. In these cases, the sample should be subjected to repeated agitation or recirculation. The operator can record foam height, collapse time, and foam recurrence over several cycles. A product that performs consistently during repeated agitation may be more useful than one that provides only a strong initial response.
Defoamer evaluation should include the properties that matter to the final product. These may include viscosity, particle-size distribution, suspension stability, emulsion stability, color, gloss, coating appearance, wetting, spreading, drying time, fabric handle, active-ingredient dispersion, and filling behavior.
An apparently effective defoamer may still be unsuitable if it affects the main product function. The best selection is the one that provides sufficient foam control with the smallest negative impact on other quality indicators.
Temperature can affect viscosity, emulsion stability, interfacial activity, and foam behavior. Testing at the expected processing temperature is therefore important. Storage tests should reflect likely warehouse and transportation conditions. If the formulation will be exposed to freezing, high heat, or repeated temperature cycling, those conditions should be included in the evaluation program.
| Evaluation aspect | Test approach | Positive compatibility indicator |
|---|---|---|
| Visual stability | Storage observation | No significant oil spots, layering, or haze |
| Foam suppression | Standardized agitation | Rapid and repeatable foam reduction |
| Persistence | Repeated agitation or circulation | Consistent foam control over time |
| Formulation integrity | Long-term storage comparison | Minimal change in viscosity and appearance |
| Application performance | Process or field simulation | No meaningful loss of the primary product function |
Organosilicone defoamer should be stored in clean, sealed containers under conditions recommended by the supplier. Containers should be protected from contamination, excessive heat, and conditions that may compromise emulsion stability. Before use, the material should be inspected for unusual separation, contamination, or significant changes in appearance.
Gentle mixing may be appropriate when the product has been stored for an extended period. Excessive high-speed agitation should be avoided unless it is part of the validated application procedure. The goal is to restore uniformity without unnecessarily changing the emulsion structure.
Reliable supply is important for customers who use defoamer in continuous manufacturing. Variations between batches can require reformulation or affect finished-product quality. Hebei Guituo New Material Co., Ltd. combines production, quality monitoring, technical support, and a diversified silicone product portfolio to support stable supply for industrial and agricultural customers.
The company also operates through Ningbo Guituo Trading Co., Ltd., supporting product sales and overseas customer communication. Its products are reported to serve domestic agrochemical enterprises and overseas markets including Europe and Southeast Asia. This international market experience helps the company understand the importance of documentation, packaging, repeatability, and customer-specific technical support.
Foam control is not an isolated additive problem. It is connected to the formulation’s surfactant balance, viscosity, polarity, mixing energy, active ingredients, temperature, and intended end use. A supplier focused on silicone materials can provide more than a generic commodity defoamer. It can help customers compare product types, adjust compatibility, and establish a practical addition procedure.
Hebei Guituo New Material Co., Ltd. has built a product structure that includes related silicone technologies rather than a single defoamer category. Its silicone additives, agricultural organosilicon products, wetting agents, modified silicone oils, dimethyl silicone oils, surfactants, and defoamers can be considered as part of a broader formulation strategy.
The company’s stated strengths include research and development, advanced production equipment, precise testing facilities, process-wide quality control, professional teams, OEM and ODM capability, and experience in agricultural and industrial applications. These strengths are relevant to customers who need consistent product quality, customized performance, and dependable technical communication.
Compared with an undifferentiated defoamer supplier, a specialized manufacturer can offer a more systematic evaluation of compatibility. It can consider whether the foam is caused by surfactants, mechanical air entrainment, viscosity, powder wetting, or gas release. It can then recommend a product and addition method based on the actual process rather than relying only on a general-purpose dosage.
Organosilicone defoamer is an efficient foam-control material for production systems where excessive foam reduces capacity, interrupts processing, or affects final-product quality. Its silicone-oil foundation provides low surface tension, spreading ability, rapid foam knockdown, and the potential for effective performance at low addition levels.
LD-610 is a white viscous polydimethylsiloxane emulsion identified by CAS number 9016-00-6 and EINECS number 618-493-1. It is designed for evaluation in water-based and other compatible industrial systems, including agricultural formulations, chemical manufacturing, paper, coatings, food, textile, pharmaceutical, electronics, and daily chemical applications.
The product’s principal advantages include strong defoaming action, stable physical properties, compatibility potential, suitability for high-surfactant environments, and adaptability through formulation customization. Its performance should be confirmed through controlled testing that considers foam knockdown, persistence, storage stability, appearance, viscosity, and the primary function of the final product.
Supported by silicone-focused research, advanced manufacturing equipment, precise testing facilities, full-process quality monitoring, professional technical teams, and OEM and ODM services, Hebei Guituo New Material Co., Ltd. provides a technical foundation for stable and customized foam-control solutions. For customers seeking a reliable organosilicone defoamer, LD-610 offers a practical starting point for laboratory screening, pilot trials, and industrial application development.
An organosilicone defoamer is a silicone-based foam-control agent formulated with silicone oil, modified silicone components, emulsifiers, and functional additives. It reduces or suppresses foam generated during mixing, pumping, processing, filling, and application.
LD-610 is based on silicone oil and is identified as a polydimethylsiloxane emulsion. Its formulation also includes supporting components that help distribute the silicone phase and provide suitable foam-control behavior.
The product is described as a white viscous emulsion. Users should inspect the material before use and follow the supplier’s recommendations for storage, mixing, and handling.
The product model is LD-610. The supplied information lists CAS number 9016-00-6, EINECS number 618-493-1, and a stated purity of 99.8 percent.
Yes. LD-610 is a silicone-based emulsion and can be evaluated in water-based systems. The actual addition method and dosage should be determined through compatibility and performance testing in the customer’s formulation.
It can be evaluated for agricultural formulations containing active ingredients, dispersants, wetting agents, emulsifiers, and other auxiliaries. Testing is important because agricultural systems vary widely in composition, foam intensity, storage conditions, and application method.
High-surfactant systems stabilize foam films and may be difficult to control. An organosilicone defoamer uses controlled spreading and interfacial activity to weaken these films and promote bubble collapse. The final result depends on silicone structure, emulsification, dosage, mixing, and compatibility.
Some silicone defoamers can be used in oil-based or solvent-containing systems, but a water-based emulsion should not be assumed to be suitable for every solvent system. The solvent type, resin, polarity, mixing conditions, and surface requirements should be reviewed before selection.
Dosage should be established through laboratory testing followed by pilot or production trials. The evaluation should consider foam height, collapse time, repeated agitation, storage stability, visual appearance, viscosity, and any effect on the final product’s primary function.
It may be added before foam forms to provide preventive control or after foam develops for rapid knockdown. The best addition point depends on the production process. Split addition can also be evaluated when foam is generated at several stages.
Yes. Excessive shear may disperse the defoamer too finely or change its distribution, potentially reducing immediate foam-breaking activity. Insufficient mixing can also be problematic because it may create local concentration differences. Controlled mixing is recommended.
Users should monitor oil spots, haze, separation, sedimentation, viscosity changes, surface defects, loss of wetting, altered coating appearance, and any reduction in active-ingredient stability or application performance.
The supplier reports silicone-material research and development, advanced production equipment, precise testing facilities, full-process quality monitoring, experienced technical and production teams, and OEM and ODM capabilities. These resources support product consistency and customized application development.
Common application areas include agriculture, chemical manufacturing, paper and pulp, coatings, inks, food processing, pharmaceuticals, textiles, electronics, daily chemicals, washing, extraction, filtration, evaporation, dehydration, and drying operations.
Customers can contact Hebei Guituo New Material Co., Ltd. for technical consultation, product documentation, application evaluation, OEM or ODM discussion, and supply information. The listed contact channels include telephone, email, and WhatsApp communication.
1. Silicone Chemistry and Technology: Principles of Silicone Oils, Modified Silicones, and Silicone Emulsions.
2. Foam Control in Industrial Processes: Mechanisms of Foam Formation, Stabilization, and Collapse.
3. Handbook of Industrial Surfactants: Interfacial Phenomena and Compatibility in Multicomponent Formulations.
4. Agricultural Formulation Science: Dispersants, Wetting Agents, Emulsifiers, and Foam-Control Additives.
5. Industrial Emulsion Technology: Manufacturing, Stability Testing, and Quality Control of Emulsion Products.
6. Technical Product Information for LD-610 Organosilicon Defoamer, supplied product data.
7. Company technical information concerning silicone additives, surfactants, modified silicone oils, agricultural silicone products, and defoamers.
For product selection, customers should confirm the applicable technical specification, regulatory requirements, storage conditions, dosage, and compatibility results before commercial use.