2026-11-12

Modern agricultural formulations must do more than carry an active ingredient. They must spread rapidly across complex plant surfaces, remain sufficiently stable during storage and application, resist separation in diluted spray mixtures, and deliver consistent performance under changing field conditions. These requirements have made advanced adjuvants increasingly important in herbicides, fungicides, insecticides, plant growth regulators, foliar fertilizers, and other crop-protection products.
Organosilicone surfactants are among the most effective materials for improving the physical behavior of agricultural liquids. By combining a silicone structure with organic, often polyether-based, functional groups, they provide an unusually strong ability to reduce surface tension. This allows droplets to spread across waxy leaves and other difficult-to-wet surfaces more efficiently than many conventional organic surfactants. At the same time, the organic portion of the molecule supports compatibility with water-based formulations and a broad range of agrochemical ingredients.
GT-7100 is an organosilicon surfactant designed for agricultural formulation and other demanding industrial applications. It is identified as a polyether-modified trisiloxane and is supplied with a stated purity of 99.8%. Its performance profile includes a surface tension below 20.5 mN/m at 0.1% by weight, a viscosity of 30–50 mm²/s at 25°C, a cloud point of no more than 35°C at 1.0% by weight, and a pH of 6.5–7.5 in a 1% aqueous solution.
The combination of rapid wetting, spreading, dispersion support, and formulation versatility makes this type of organosilicone surfactant valuable when a manufacturer needs more efficient coverage without relying solely on higher spray volumes or higher active-ingredient loading. Its benefits are especially relevant to agricultural products that must perform on leaves with high wax content, irregular geometry, natural hairs, or low surface energy.

Organosilicone Surfactant
Agricultural products are often applied as diluted liquid sprays. Once a droplet leaves the nozzle, it must travel through the air, contact a plant surface, spread over that surface, remain attached long enough to deliver the active ingredient, and in some cases support absorption through the cuticle. Each stage can be affected by surface tension, viscosity, evaporation, water quality, temperature, humidity, leaf morphology, and the compatibility of the formulation components.
Without an effective wetting aid, a spray droplet may remain rounded, bounce from the leaf, form isolated beads, or collect into larger puddles. This creates uneven coverage. Some areas may receive excessive product while other areas receive little or none. The result can be reduced pest control, incomplete weed suppression, inconsistent disease protection, or uneven nutrient delivery.
Conventional surfactants can improve wetting, but their performance may be limited when the target surface is strongly hydrophobic. They may also require relatively high concentrations, create excessive foam, show limited compatibility with certain active ingredients, or provide insufficient spreading under difficult conditions. Organosilicone surfactants address these challenges through the very low surface tension that can be achieved by their silicone-based molecular structure.
The value of an adjuvant should not be measured only by its ability to lower surface tension. A commercially useful product must also provide a balanced performance profile. It should be easy to incorporate, compatible with the intended formulation, sufficiently stable during storage, suitable for dilution in spray water, and adaptable to the customer’s processing and application requirements. The product must also be supported by reliable quality control and technical communication.
GT-7100 is described as an organosilicon surfactant, silicone surfactant, and polyether-modified trisiloxane. The product is intended to function as a high-efficiency wetting and spreading agent, particularly in agricultural formulations. It may also contribute to emulsification, dispersion, penetration, solubilization, and foam management, depending on the formulation design and dosage.
| Parameter | Stated Value | Formulation Significance |
|---|---|---|
| Product model | GT-7100 | Product identification for technical and commercial communication |
| Product name | Organosilicon surfactant | Surface-active silicone additive for liquid formulations |
| CAS number | 27306-78-1 | Chemical identification reference |
| Purity | 99.8% | Supports consistency and predictable formulation behavior |
| EINECS number | 608-078-3 | Regulatory and substance-identification reference |
| Synonym | Silicone surfactant; polyether-modified trisiloxane | Describes the product family and molecular functionality |
| Viscosity at 25°C | 30–50 mm²/s | Relevant to pumping, blending, dosing, and handling |
| Surface tension at 0.1% by weight | Below 20.5 mN/m | Indicates strong wetting and spreading potential |
| Cloud point at 1.0% by weight | Not more than 35°C | Important for dilution behavior and temperature-sensitive systems |
| pH of 1% aqueous solution at 25°C | 6.5–7.5 | Near-neutral profile for many water-based formulations |
These specifications provide a useful starting point for formulation development, but the final dosage and suitability must always be confirmed through laboratory testing. Agrochemical products differ widely in active ingredients, solvents, salts, emulsifiers, preservatives, thickeners, and buffering systems. A surfactant that performs well in one product may require a different concentration or blending sequence in another.
Wetting depends on the balance between liquid surface tension, solid-surface energy, and the contact angle formed by a droplet. A high contact angle indicates poor wetting, while a lower contact angle indicates that the liquid spreads more readily. Plant leaves often have a natural wax layer that limits water adhesion. This is beneficial for the plant because it helps reduce water loss, but it also creates a barrier to uniform agricultural spray coverage.
Organosilicone surfactants reduce the surface tension of the spray liquid. When a droplet reaches a leaf, the lower surface tension allows it to flatten and spread over a larger area. The result can be a thinner and more continuous film around the target surface. This is particularly important when the active ingredient must contact a broad area of foliage rather than remain concentrated in isolated droplets.
The silicone portion of a polyether-modified trisiloxane is associated with exceptional surface activity. The polyether portion contributes hydrophilic character and supports interaction with water. This combination enables the surfactant to position itself at the air–liquid and liquid–solid interfaces, reducing the energy required for spreading.
Compared with many conventional nonionic surfactants, organosilicone surfactants can achieve very low surface tension at relatively low use levels. This does not mean that the lowest possible dosage is always the best choice. Excessive spreading can sometimes increase runoff, accelerate drying, intensify penetration, or increase the risk of crop response. The correct dosage should therefore be established through formulation and plant-safety trials.
The main wetting benefits of GT-7100 may include faster droplet spreading, improved coverage of hydrophobic foliage, better contact with irregular plant surfaces, reduced droplet beading, and more uniform distribution of active ingredients. These effects can improve the probability that the applied formulation reaches the intended biological target.
Improved spreading can also be valuable when spray volume is limited. In low-volume or concentrated application systems, every droplet must cover as much of the target as practical. A high-efficiency organosilicone surfactant can help the available liquid form a more continuous deposit, although the final result still depends on nozzle selection, droplet size, weather conditions, and the physical properties of the complete formulation.
Wetting is only one part of formulation performance. Agricultural products frequently contain ingredients with different polarities and solubilities. Some active ingredients dissolve readily in water, while others require organic solvents, oil phases, emulsifiers, or fine-particle dispersion systems. Inadequate stabilization can lead to sedimentation, creaming, phase separation, agglomeration, or precipitation.
Organosilicone surfactants can support dispersion by helping liquid phases interact with solid particles or by lowering the interfacial tension between immiscible phases. In a suspension concentrate, the surfactant may assist the wetting of active-ingredient particles and reduce the tendency of particles to form large agglomerates. In an emulsion, it may help stabilize the interface between oil and water. In a soluble concentrate or adjuvant package, it may support the uniform distribution of other components.
It is important to distinguish between a surfactant’s ability to assist dispersion and the complete stabilization of a formulation. Long-term stability usually depends on multiple factors, including particle size, rheology, density difference, emulsifier selection, preservatives, packaging, temperature, and manufacturing energy. GT-7100 can be incorporated as part of a properly designed system, but it should not be considered a substitute for all other formulation controls.
Surface-active materials can be used to promote emulsification when a stable mixture of oil and water is required. They can also be selected or formulated to support demulsification when the objective is to separate phases. This dual functional category is important in industrial processing, where the desired result depends on the composition and process stage.
For agricultural products, emulsification may be required in emulsifiable concentrates, oil-in-water systems, adjuvant concentrates, and certain foliar nutrient products. The organosilicone surfactant can help reduce interfacial tension during mixing and improve the distribution of one phase through another. The final emulsion stability must be evaluated under storage, dilution, agitation, temperature cycling, and application conditions.
A stable formulation should remain as uniform as possible from the beginning of storage through the final application. Phase separation may cause inconsistent dosing, while settling may create a concentrated layer at the bottom of a container or spray tank. Organosilicone surfactants can contribute to more uniform wetting and distribution of ingredients, reducing some causes of instability.
Improved physical stability offers several commercial advantages. It can reduce the need for excessive shaking, lower the risk of uneven application, support longer storage, and improve customer confidence. It may also reduce production losses caused by difficult-to-process mixtures or rejected batches. Nevertheless, stability must be confirmed using accelerated aging and real-time storage studies appropriate to the product category.
Herbicides often need to spread across leaves with protective wax layers. Improved wetting and coverage can help the active ingredient contact more of the target weed. A suitable organosilicone surfactant may also support penetration into the leaf surface, depending on the active ingredient, plant species, environmental conditions, and application rate.
Better coverage can be particularly important for weeds with narrow leaves, upright growth, dense foliage, or surfaces that naturally repel water. The surfactant may help droplets move around leaf irregularities and reach a larger area. However, increased spreading does not automatically guarantee greater herbicidal activity. Biological performance must be established through controlled efficacy testing.
Fungicides may require thorough coverage of leaves, stems, fruit surfaces, or other plant tissues. Inadequate distribution can leave untreated areas where disease may develop. An organosilicone surfactant can assist the formation of a more uniform spray deposit, supporting the intended protective or curative strategy.
For contact fungicides, surface coverage is often especially important because the active ingredient must remain on the exterior of the plant. For systemic or translaminar products, wetting and retention can influence the amount of material available for absorption. Compatibility testing remains essential because some fungicide formulations are sensitive to surfactant type and concentration.
Insecticides may be applied to leaf surfaces, stems, fruit, or plant structures where insects feed or shelter. Improved spreading can increase contact with hidden or uneven surfaces. It may also help distribute the active ingredient more consistently across crop canopies.
Because insecticide performance can be affected by droplet size, evaporation, leaf retention, and insect behavior, the surfactant should be evaluated as part of the complete spray program. A formulation that spreads too aggressively under high temperatures may increase runoff or reduce deposit retention. Balanced development is therefore more valuable than simply pursuing the lowest surface tension.
Foliar fertilizers must distribute nutrients across the plant surface and remain sufficiently available for uptake. Organosilicone surfactants can improve wetting and help prevent isolated droplets from remaining concentrated in small spots. Better distribution may support more uniform nutrient delivery across the crop canopy.
Micronutrient products can contain salts, chelates, suspending agents, or organic components that influence solution behavior. The near-neutral pH profile of a 1% aqueous solution may be convenient for some systems, but the pH and ionic strength of the final product must be checked because salts can change surfactant behavior.
Plant growth regulators and specialty crop inputs are often applied at relatively low active-ingredient concentrations. Uniform distribution can be important because small differences in dose may affect plant response. An organosilicone surfactant can help the diluted spray contact the target surface more consistently.
| Application Area | Potential Contribution | Primary Development Considerations |
|---|---|---|
| Herbicides | Improved leaf wetting, spreading, and possible penetration support | Crop safety, weed efficacy, runoff, and compatibility with active ingredients |
| Fungicides | More uniform coverage of plant tissues | Deposit retention, disease-control performance, and rainfastness |
| Insecticides | Better distribution across complex plant surfaces | Droplet behavior, insect target location, and phytotoxicity |
| Foliar fertilizers | More even distribution of nutrients | Salt compatibility, uptake response, and final solution stability |
| Plant growth regulators | Improved uniformity at low application concentrations | Precise dosing, crop response, and formulation storage stability |
| Adjuvant concentrates | Wetting, spreading, emulsification, or dispersion support | Concentrate viscosity, dilution behavior, and foam control |
The principal advantage of an organosilicone surfactant is its ability to reduce surface tension to a very low level. Many conventional surfactants improve wetting, but a polyether-modified trisiloxane can provide more rapid spreading on difficult surfaces at comparatively low concentrations. This may help formulators achieve the desired coverage with less additive than would be required by a less efficient wetting agent.
A second advantage is functional versatility. Depending on the formulation, organosilicone surfactants may contribute to wetting, spreading, penetration, emulsification, dispersion, solubilization, and foam management. This multifunctional behavior can simplify additive packages and reduce the need to combine several narrowly focused ingredients.
A third advantage is the balance between silicone performance and organic compatibility. Pure silicone materials may not always provide the required water compatibility, while purely organic surfactants may lack the same spreading efficiency. Polyether modification helps bridge these requirements, allowing the material to function in a broader range of water-based and mixed-phase systems.
A fourth advantage is the possibility of improved application efficiency. More uniform coverage can support better use of the active ingredient and may allow formulators or applicators to optimize water volume, spray conditions, or additive concentration. Any reduction in active-ingredient rate must be established by regulatory, agronomic, and efficacy testing; the surfactant should not be used to make unsupported claims of automatic dose reduction.
GT-7100’s stated surface tension below 20.5 mN/m at 0.1% by weight is a significant performance indicator. It suggests strong spreading potential in dilute aqueous systems. The stated viscosity range also supports practical handling, while the near-neutral pH of a 1% aqueous solution may reduce concerns about strong acidity or alkalinity in many formulations.
Competitor comparisons should be conducted using identical test conditions. Surface tension values can vary with concentration, temperature, water hardness, measurement method, aging time, and contamination. A fair technical comparison should examine not only surface tension but also contact angle, spreading diameter, dynamic wetting time, foam profile, compatibility, storage stability, crop safety, and biological efficacy.
Product performance begins with molecular design but depends heavily on manufacturing consistency. Small variations in raw materials, reaction conditions, catalyst activity, polyether composition, moisture, or purification can influence viscosity, surface activity, color, odor, cloud point, and compatibility. For this reason, advanced equipment and process control are essential to the production of organosilicone additives.
The manufacturer described in the supplied materials operates as a high-technology new-materials enterprise integrating research and development, production, and sales. Its manufacturing system is supported by advanced production equipment, precision testing facilities, and full-process quality monitoring from production sources through finished-product delivery.
This integrated structure provides several practical advantages. Research and production teams can communicate directly when a customer requires a new specification. Quality personnel can monitor critical parameters during processing rather than relying only on final-product inspection. Sales and technical teams can also gather application feedback and transfer it back to product-development personnel.
Reliable organosilicone surfactant production begins with controlled raw materials. Key inputs should be evaluated for identity, purity, moisture, functionality, and batch consistency. The manufacturing process must control reaction temperature, mixing intensity, addition sequence, residence time, pressure where applicable, and post-reaction treatment.
Process control is especially important for silicone-polyether materials because the final product’s performance depends on the relationship between hydrophobic silicone segments and hydrophilic organic segments. Consistent molecular architecture supports predictable interfacial behavior. Deviations can affect cloud point, water dispersibility, low-temperature behavior, and surface tension.
Finished-product testing may include appearance, viscosity, density, active content, surface tension, pH, water compatibility, cloud point, and storage stability. The most relevant tests depend on the product grade and customer application. Retained samples should be maintained to support traceability and investigate any future technical question.
For an agricultural surfactant, surface tension testing is particularly important. The test concentration must be clearly defined because a material can behave very differently at 0.01%, 0.1%, and 1.0%. Temperature and water quality should also be recorded. Results become more useful when supported by dynamic contact-angle measurements, spreading tests, and practical spray evaluations.
The stated purity of 99.8% provides an important indication of product concentration, but purity alone does not define agricultural performance. A high-purity additive must also have consistent molecular characteristics and low levels of unwanted by-products. This is why a complete quality system should combine chemical analysis with functional-performance testing.
Customers in the agrochemical industry require dependable supply throughout formulation and production cycles. Delayed delivery can interrupt batch scheduling, packaging, and seasonal preparation. A manufacturer with established production facilities, experienced technical personnel, and coordinated sales operations is better positioned to support stable supply.
The company’s product portfolio includes silicone additives, wetting agents, modified silicone oils, dimethyl silicone oils, surfactants, defoamers, and related materials. A broad portfolio can benefit customers that want to source multiple additive categories from one technical partner. It also allows the supplier to recommend complementary materials when a single product cannot meet every requirement.
Different customers may need different product characteristics. A pesticide formulator may prioritize rapid spreading and low use concentration. A fertilizer producer may focus on salt compatibility and low foam. An industrial customer may require a particular cloud point, viscosity, dilution profile, or stability range. Customization allows the additive to better match the final formulation and manufacturing process.
The supplied company information indicates that OEM and ODM orders are accepted. This creates opportunities for private-label supply, customized specifications, application-specific grades, and collaborative product development. Customization should begin with a clear technical brief that identifies the formulation type, active ingredients, solvent system, target dosage, storage conditions, packaging, and regulatory market.
A structured development process can include initial application screening, laboratory compatibility testing, optimization of concentration, accelerated storage, small-scale production, pilot validation, and commercial-scale confirmation. This approach reduces the risk of introducing a promising additive into a formulation without understanding its long-term behavior.
Compatibility testing should begin with a simple observation of miscibility and appearance. The surfactant can be added to the candidate formulation at several concentrations, followed by evaluation for haze, precipitation, gel formation, separation, color change, and viscosity shift. Dilution into representative spray water should also be examined.
More advanced tests may include freeze–thaw cycling, heat aging, centrifugation, prolonged storage, dilution stability, foam generation, foam persistence, and resistance to hard-water ions. If the product is intended for plant application, leaf-wetting tests, contact-angle measurements, spreading tests, and greenhouse trials should follow.
The formulation should be tested at both the recommended concentration and a reasonable overdosing range. This helps identify the margin of safety and reveals whether excessive surfactant could cause unwanted foaming, runoff, phytotoxicity, or instability. Testing should be performed with the exact commercial active ingredient and other additives whenever possible.
GT-7100 should be stored in a clean, sealed container and protected from contamination, excessive heat, and conditions that may cause water ingress or prolonged exposure to unsuitable temperatures. Before use, the product should be inspected for changes in appearance, phase separation, or other abnormalities. Any unusual condition should be investigated before incorporation into a commercial batch.
In a water-based formulation, the surfactant may be added during a controlled mixing stage after the main liquid phase has been prepared. The optimum addition sequence depends on the formulation. In some systems, premixing with a portion of water can improve distribution. In others, the surfactant may be added after emulsification or after the active ingredient has been fully dispersed.
High shear can be useful for some emulsions and suspensions, but excessive agitation may create unwanted foam. The best process should balance mixing efficiency with foam control. If a defoamer is required, it should be selected carefully because defoamers and surfactants can counteract each other or change the final wetting behavior.
The recommended dosage should be established through controlled trials. The stated surface tension at 0.1% by weight indicates that this concentration is a meaningful test point, but it should not automatically be treated as a universal commercial dosage. Final use levels may be lower or higher depending on the active ingredient, formulation type, spray water, crop, application method, and target performance.
Responsible use is essential for every agricultural additive. Improved spreading can increase the area covered by a spray, but it may also increase runoff if application conditions are unsuitable. Operators should avoid spraying before heavy rain, during excessive wind, or when the crop is under severe environmental stress. Buffer zones and local application requirements should be observed near waterways.
The supplied product information describes organosilicone surfactants as generally lower-impact materials compared with some traditional surfactants and indicates that they are designed for biodegradability and low toxicity when used properly. Environmental behavior is influenced by molecular structure, concentration, degradation pathways, metabolites, co-formulants, and local conditions. Therefore, product-specific safety and environmental data should be reviewed before registration or commercial use.
Crop safety must also be confirmed. Some crops, varieties, growth stages, or environmental conditions may be more sensitive to highly efficient wetting agents. High concentrations can sometimes increase penetration beyond the intended level or intensify the effect of an active ingredient. Good practice includes following the formulation developer’s instructions, observing label requirements, and conducting small-scale trials before broad application.
Environmental stewardship does not conflict with performance. A well-designed organosilicone surfactant can help improve application uniformity and reduce wasted material. The objective is not simply to maximize spreading, but to achieve the required biological result with an appropriate and controlled amount of product.
Purchasing an agricultural surfactant involves more than comparing a price per kilogram. Customers also need confidence in batch consistency, delivery reliability, technical support, documentation, and the supplier’s ability to respond when formulation conditions change.
An integrated manufacturer with research, production, testing, and sales capabilities can address these needs more effectively than a trading channel that has limited control over production. Direct access to production data may improve traceability. In-house testing can shorten the time needed to investigate a specification question. Technical teams can help customers determine whether a problem originates from the surfactant, the active ingredient, the mixing sequence, or the spray water.
The company’s experience across agriculture, daily chemicals, electronics, textiles, and other industries also provides a broad perspective on silicone-material behavior. Knowledge gained in one application area can support innovation in another. For example, experience with defoaming, surface modification, or dispersion control may contribute to better agricultural additive design.
International customers may also benefit from export experience and established communication channels. The supplied contact information identifies sales and service channels for domestic and overseas customers, including telephone, email, and WhatsApp contact options. Commercial purchasers should request current technical data sheets, safety documentation, packaging information, certificates of analysis, and regulatory support relevant to their destination market.
| Customer Requirement | Relevant Product or Supplier Strength | Expected Value |
|---|---|---|
| Rapid wetting of difficult surfaces | Very low stated surface tension at dilute concentration | More efficient spreading and potentially more uniform coverage |
| Stable product quality | Stated 99.8% purity and process-oriented quality monitoring | More predictable formulation development and batch performance |
| Water-based formulation compatibility | Polyether-modified silicone structure and near-neutral 1% aqueous pH | Useful starting point for many aqueous systems |
| Efficient production handling | Moderate stated viscosity range of 30–50 mm²/s at 25°C | Practical dosing, pumping, and blending potential |
| Broad application potential | Wetting, dispersion, emulsification, solubilization, and foam-related functions | One additive may support multiple formulation objectives |
| Customized development | OEM and ODM capability | Product adaptation for application-specific requirements |
| Supply assurance | Integrated research, production, testing, and sales structure | Improved coordination and technical responsiveness |
An organosilicone surfactant is a surface-active material that combines a silicone-based structure with organic functional groups. In agricultural applications, it is mainly used to reduce surface tension, improve wetting and spreading, support dispersion, and promote more uniform distribution of active ingredients on plant surfaces.
GT-7100 is intended for use as an organosilicon surfactant in agricultural and other liquid formulations. It may be incorporated into herbicides, fungicides, insecticides, foliar fertilizers, plant growth regulators, adjuvant concentrates, and selected industrial systems where low surface tension and improved interfacial behavior are required.
It describes a silicone-based surfactant in which a trisiloxane structure is modified with polyether groups. The silicone portion provides strong surface activity, while the polyether portion contributes hydrophilic behavior and supports compatibility with water-containing formulations.
It lowers the surface tension of the spray liquid, allowing droplets to spread more readily when they contact plant leaves or other solid surfaces. This can reduce beading and improve the uniformity of the liquid film. Actual coverage depends on dosage, droplet size, crop surface, weather, nozzle design, and the complete formulation.
It may improve the physical delivery of a pesticide by supporting wetting, spreading, and in some cases penetration. However, biological effectiveness depends on the active ingredient, target organism, crop, environmental conditions, and application practice. Efficacy claims should be confirmed through appropriate trials.
No additive should be assumed to be universally compatible. GT-7100 is designed for broad formulation utility, but compatibility must be evaluated with the specific active ingredient, solvent, emulsifier, salt, thickener, preservative, and other components. Jar tests, storage tests, dilution tests, and crop-safety tests are recommended.
This specification indicates strong surface activity in a dilute aqueous system. Lower surface tension generally supports faster spreading and improved wetting. Because testing conditions affect the result, comparisons should use the same concentration, temperature, water quality, and measurement method.
The cloud point is the temperature at which a surfactant solution begins to lose clarity or undergo a visible change under defined conditions. A stated cloud point of no more than 35°C at 1.0% by weight provides useful information about temperature-dependent behavior in aqueous systems. Formulators should test the final product under actual storage and application conditions.
It may be suitable for foliar fertilizer and micronutrient systems where improved wetting and distribution are desired. Compatibility testing is important because salts, chelates, and concentrated nutrients can change viscosity, cloud point, foam, and phase behavior.
The product information identifies foam suppression and defoaming among the possible functions of surface-active materials, but the actual foam profile depends strongly on the formulation and mixing process. A dedicated defoamer may still be needed in systems that generate substantial foam. Foam testing should be conducted before commercialization.
It is designed for agricultural formulation use, but crop safety depends on concentration, crop species, variety, growth stage, weather, active ingredient, and application method. Users should follow the supplier’s recommendations and conduct controlled trials before extensive field application.
Begin with laboratory screening at several concentrations, including the intended use level and a modest range above and below it. Evaluate surface tension, spreading, compatibility, foam, storage stability, and biological performance. The lowest concentration that meets the complete performance requirement is not always the best if it creates unacceptable crop-safety or runoff concerns.
The supplied company information indicates that OEM and ODM orders are accepted. Customers can discuss customized specifications, application-specific grades, packaging, and technical requirements with the manufacturer’s sales and technical teams.
Customers should request a current technical data sheet, safety data sheet, certificate of analysis, recommended storage conditions, packaging information, batch-traceability details, and any regulatory or application documentation required for the destination market.
Organosilicone surfactants provide a powerful way to improve the physical performance of agricultural formulations. Their ability to reduce surface tension, enhance wetting, promote spreading, support dispersion, and improve interfacial behavior can help formulators address the practical challenges of modern crop protection and foliar nutrition.
GT-7100 offers a clearly defined technical profile, including 99.8% stated purity, a surface tension below 20.5 mN/m at 0.1% by weight, a viscosity of 30–50 mm²/s at 25°C, a cloud point of no more than 35°C at 1.0% by weight, and a near-neutral pH in a 1% aqueous solution. These characteristics make it a strong candidate for screening in herbicide, fungicide, insecticide, fertilizer, plant growth regulator, and adjuvant formulations.
Its advantages are strengthened by the supplier’s integrated research, production, testing, and sales structure; advanced manufacturing and testing equipment; full-process quality monitoring; broad silicone-material portfolio; technical experience; export capability; and OEM and ODM services. Together, these resources can help customers move from initial laboratory evaluation to reliable commercial production.
The best results will come from treating the surfactant as part of a complete formulation system. Careful dosage selection, compatibility testing, storage evaluation, crop-safety assessment, and responsible application are essential. When these steps are followed, a high-performance organosilicone surfactant can contribute to more uniform coverage, more efficient use of formulation components, and improved consistency across agricultural applications.
1. Rosen, M. J., and Kunj. K. Surfactants and Interfacial Phenomena. Standard reference material on surface tension, adsorption, wetting, emulsification, and surfactant behavior.
2. Tadros, T. F. Applied Surfactants: Principles and Applications. Technical reference on surfactant selection, formulation stability, dispersion, emulsions, and industrial applications.
3. Knowles, A. Adjuvants and Additives for Crop Protection. Reference material on agricultural spray adjuvants, wetting agents, spreading, retention, and crop safety.
4. International Organization for Standardization. Surface-active agents and interfacial measurement methods. General reference for surface-tension and wetting-performance evaluation.
5. American Society for Testing and Materials. Standard practices for viscosity, pH, accelerated storage, and physical stability testing of chemical formulations.
6. Food and Agriculture Organization of the United Nations. Guidance on pesticide application, responsible agricultural chemical use, and environmental protection.
7. Manufacturer-provided technical information for GT-7100 organosilicon surfactant, including product specifications, application guidance, and quality-control descriptions.