2026-11-14

Agricultural spray performance depends on more than the active ingredient selected for a crop protection program. Even a highly effective herbicide, insecticide, fungicide, foliar fertilizer, or plant growth regulator may perform below its potential when spray droplets remain concentrated in small areas, roll off waxy leaves, evaporate too quickly, or are removed by rain before sufficient absorption takes place. Agricultural organosilicone adjuvants are designed to address these practical limitations by modifying the physical behavior of spray solutions on plant surfaces.
The GT-8110, GT-8210, and GT-8310 product series is a group of polyether-modified trisiloxane agricultural organosilicone adjuvants developed for spreading, wetting, penetration, adhesion, and spray-application support. These products are supplied as concentrated multifunctional adjuvants for use with a broad range of crop protection and plant nutrition formulations. Their low surface-tension performance enables spray droplets to spread rapidly over leaf surfaces, improving coverage and supporting more efficient contact between the active ingredient and the target plant tissue.
Compared with conventional nonionic wetting agents, organosilicone adjuvants can provide a more pronounced superspreading effect at low use concentrations. This characteristic may allow formulators and growers to improve spray coverage, reduce unnecessary water consumption, support pesticide absorption, and lower the frequency of repeat applications when the complete spray program and environmental conditions are suitable. Actual performance depends on crop species, leaf structure, active ingredient, water quality, application equipment, weather, and the recommended dosage.
The product series is manufactured by Hebei Guituo New Material Co., Ltd., a high-technology silicone materials enterprise integrating research and development, production, testing, and sales. Its manufacturing and quality-control system covers raw-material selection, silicone synthesis, polyether modification, blending, testing, filling, and finished-product inspection. This integrated approach helps provide stable product quality and reliable supply for agricultural formulators, distributors, professional growers, and international customers.

Agricultural Organosilicone Adjuvant
An agricultural adjuvant is a substance added to a pesticide or agricultural spray mixture to improve application performance. An adjuvant does not normally provide the primary pest-control activity itself. Instead, it influences how the spray is deposited, distributed, retained, absorbed, or transported after application.
Organosilicone adjuvants are a specialized class of silicone-based surfactants. The silicone structure provides exceptionally low surface tension, while the polyether segment contributes water compatibility and surface-active behavior. This combination allows the adjuvant to interact with both the aqueous spray solution and the hydrophobic surface of many crop leaves.
When water is applied to a leaf without a suitable surfactant, the droplet may remain rounded because of surface tension. Waxy leaves, hairy leaves, vertical leaves, and leaves with irregular surface structures can make this problem more significant. A rounded droplet covers only a limited area and may slide away, especially when the leaf angle is steep or the surface is highly hydrophobic.
After an agricultural organosilicone adjuvant is introduced, the spray solution can spread more rapidly and evenly. The droplet may flatten into a thin film, increasing the area of contact between the spray and the leaf. This physical improvement can reduce untreated gaps and help distribute active ingredients more uniformly across the target surface.
The GT-8110, GT-8210, and GT-8310 series is intended to function as a spray modifier, foliar absorption enhancer, activator, and aid for aerial or low-volume application. It can be considered for use with herbicides, insecticides, fungicides, foliar fertilizers, micronutrients, and plant growth regulators, provided compatibility testing and label requirements are observed.
The most visible benefit of an organosilicone adjuvant is improved droplet spreading. The product helps reduce the surface tension of the spray solution, allowing droplets to extend across a larger area of the leaf. This can be particularly valuable when the target crop has a waxy cuticle, narrow leaves, vertical foliage, or dense canopy conditions that make uniform spray distribution difficult.
According to the supplied product information, the agricultural organosilicone adjuvant may provide a spreading area and spreading speed dozens to hundreds of times greater than conventional adjuvants under comparable test conditions. Such comparisons should be interpreted as directional performance claims rather than universal field guarantees because the result depends on formulation composition, leaf type, droplet size, water quality, temperature, and application method.
Better spreading can improve the distribution of a spray across the target area. Instead of several isolated beads, the solution may form a more continuous film. This helps make better use of the active ingredient already present in the tank and may reduce the risk that pests, pathogens, or weeds remain outside the treatment zone.
Organosilicone adjuvants can support the movement of spray solution into natural pathways on plant surfaces. Their low surface tension may allow the liquid to move into small surface features, including stomatal openings when those openings are accessible and environmental conditions are favorable.
This effect is sometimes described as a “stomatal-channel” effect. It should not be understood as a guarantee that every active ingredient will enter plant tissue in the same way or at the same rate. Rather, the adjuvant improves the physical conditions for contact and penetration, while the chemistry of the active ingredient, the condition of the leaf, and the application timing continue to determine biological performance.
The supplied product description indicates that the adjuvant may enhance pesticide efficacy by approximately 30–50 percent in suitable programs. This figure should be validated through crop-specific trials, because efficacy is influenced by the target organism, active ingredient, formulation type, dosage, crop growth stage, weather, and resistance status.
Improved wetting and spreading can help growers obtain more effective coverage from a smaller volume of water. The product information indicates that spray volume may be reduced by approximately 30–50 percent in appropriate applications. Lower water demand can be important for farms operating under water restrictions, large-scale agricultural enterprises with distant water sources, and aerial or drone applications where payload capacity is limited.
Reducing spray volume may also decrease the number of tank refills required during a field operation. This can lower water-hauling requirements, fuel consumption, equipment travel, and labor intensity. However, water-volume reductions should be introduced carefully. The final spray volume must remain sufficient for the crop canopy, target location, equipment type, nozzle selection, droplet spectrum, and regulatory requirements.
Spray loss caused by wind, irrigation, dew, and rainfall is a significant concern in crop protection. An organosilicone adjuvant can improve the way a spray solution contacts and remains on a plant surface. A more uniform film may reduce the tendency of droplets to roll from the leaf or remain concentrated in isolated spots.
Improved adhesion does not mean that a spray becomes completely rainproof. Rainfall soon after application may still reduce performance, especially before the active ingredient has dried or been absorbed. The adjuvant can, however, support better retention and may extend the practical rainfastness window when used with a compatible pesticide formulation.
Rainfastness must always be considered together with the label of the pesticide being applied. The pesticide manufacturer’s instructions remain the primary reference for minimum drying time, rainfall restrictions, crop safety, and re-entry requirements.
When spray droplets bounce, roll away, drift, or wash off, part of the applied material may fail to reach the intended target. Better wetting and retention can reduce these physical losses. By improving the efficiency of deposition, an adjuvant may help growers obtain more value from each unit of pesticide or foliar nutrient used.
Reduced loss can also support more responsible chemical management. If the same biological result can be achieved with a lower application frequency or more efficient use of the registered dose, growers may reduce chemical consumption, field traffic, and the risk of unnecessary runoff. These benefits depend on responsible product stewardship and must not be interpreted as permission to reduce pesticide rates below legally approved or agronomically validated levels.
The GT-8110, GT-8210, and GT-8310 products are identified as agricultural organic silicon adjuvants and polyether-modified trisiloxane silicone surfactants. They are supplied as concentrates and are intended to be diluted into agricultural spray mixtures according to technical guidance and compatibility testing.
| Property | Specification or Description |
| Product models | GT-8110, GT-8210, GT-8310 |
| Product category | Agricultural silicone synergist and spray adjuvant |
| General name | Agricultural organosilicone adjuvant |
| Synonyms | Silicone surfactant; polyether-modified trisiloxane |
| CAS number | 27306-78-1 |
| EINECS number | 608-078-3 |
| Purity | 99 percent |
| Viscosity at 25°C | 30–50 mm²/s |
| Surface tension at 0.1 percent by weight | Less than 20.5 mN/m |
| Cloud point at 1.0 percent by weight | Not more than 35°C |
| pH value of 1 percent aqueous solution at 25°C | 6.5–7.5 |
Surface tension is one of the most important technical indicators for a superspreading agricultural adjuvant. The reported value below 20.5 mN/m at a 0.1 percent concentration indicates strong surface activity. A lower surface tension generally helps droplets spread over hydrophobic surfaces, although the actual field result depends on the spray mixture and the plant surface.
The reported pH range of 6.5–7.5 for a one-percent aqueous solution indicates a near-neutral profile under the specified test condition. This may be useful when the adjuvant is combined with active ingredients that are sensitive to strongly acidic or strongly alkaline conditions. Nevertheless, each tank mixture should be evaluated separately because pesticide formulations may contain salts, solvents, buffers, emulsifiers, or other components that influence final pH.
The viscosity range of 30–50 mm²/s at 25°C supports practical handling and dosing of the concentrate. Viscosity can influence pouring, metering, pump behavior, and mixing speed. The cloud point provides additional information about the behavior of the diluted product at elevated temperatures. Storage and application conditions should follow the supplier’s technical documentation and safety data sheet.
When a spray droplet reaches a leaf, several outcomes are possible. It may spread, bounce, remain as a bead, break into smaller droplets, or slide away. These outcomes are influenced by droplet size, impact speed, leaf angle, surface roughness, wax content, humidity, temperature, and the chemical composition of the spray.
The presence of a polyether-modified trisiloxane can change the balance between the liquid and the leaf surface. Lower surface tension allows the droplet to deform more easily after impact. Instead of maintaining a rounded shape, it can move outward from the original point of contact.
Once the droplet spreads, it may form a thin film over a larger portion of the leaf. This improves the probability that the active ingredient will contact the intended tissue or pest. Film formation can also reduce concentration differences between the center and edge of the original droplet.
Uniform film formation is especially important for contact fungicides, contact insecticides, herbicides that require thorough weed coverage, and foliar nutrients applied to dense or irregular foliage. Systemic products can also benefit from more consistent deposition because the active ingredient must first reach an appropriate absorption site.
After spreading, the spray solution may interact with the cuticle, surface hairs, stomata, and other microscopic structures. The adjuvant can support movement into accessible openings and improve contact with the outer plant surface. At the same time, the remaining film may provide improved retention compared with a spray that forms large, mobile droplets.
Penetration is not identical to translocation. The adjuvant does not determine how an active ingredient moves within the plant. Absorption and translocation depend on the pesticide’s molecular properties, formulation, plant metabolism, environmental conditions, and application timing.
Conventional nonionic surfactants can provide useful wetting and spreading performance, and they remain appropriate for many agricultural applications. However, their surface-tension reduction may be less pronounced than that of organosilicone products. They may also require higher inclusion rates to achieve a similar degree of spreading on strongly hydrophobic leaves.
The main competitive advantage of an organosilicone adjuvant is its ability to combine very low surface tension with rapid spreading. This can make it particularly suitable for low-volume spraying, difficult-to-wet foliage, dense crop canopies, and application programs where fast deposition is important.
| Performance factor | Conventional nonionic wetting agent | Agricultural organosilicone adjuvant |
| Surface-tension reduction | Moderate to strong depending on formulation | Very strong surface activity; the supplied product specification is below 20.5 mN/m at 0.1 percent by weight |
| Droplet behavior | Improves wetting but may leave a visible bead | Promotes rapid spreading and thin-film formation |
| Performance on waxy leaves | May require a higher dosage or additional formulation support | Designed to improve wetting on hydrophobic crop surfaces |
| Stomatal-channel support | Usually limited by higher surface tension | Low surface tension may support movement through accessible stomatal openings |
| Low-volume application | Performance varies with formulation and equipment | Well suited to programs emphasizing coverage per unit of water |
| Rain-wash-off resistance | May improve retention to a moderate degree | Can support more uniform adhesion and improved retention when compatible with the pesticide |
| Use-rate efficiency | May require relatively high rates for difficult surfaces | Often effective at low inclusion levels, subject to product-specific recommendations |
The table provides a general technical comparison rather than a replacement for product-specific trials. Some advanced nonionic surfactants may perform exceptionally well, while some agricultural organosilicone products may differ in molecular structure and application profile. Buyers should compare verified laboratory data, field results, compatibility, regulatory status, and total cost per treated hectare.
Herbicides must contact the target weed with sufficient coverage and remain available long enough for absorption. Dense leaf surfaces, waxy foliage, and small target weeds can all create challenges. An organosilicone adjuvant may improve the distribution of the spray and support more consistent contact.
It is important to follow the herbicide label because some active ingredients may be sensitive to aggressive penetration. Excessive adjuvant dosage can increase crop injury in certain conditions. Compatibility and crop-safety testing should therefore be completed before broad-acre application.
Fungicides often require thorough coverage of leaf surfaces, stems, flowers, or fruit. Incomplete coverage can leave untreated areas where infection develops. Improved spreading can help a fungicide reach more of the plant surface, particularly when the crop canopy is dense.
For systemic and translaminar fungicides, better wetting can support contact and absorption. For protectant fungicides, uniform film formation may help provide more even surface protection. The final result still depends on disease pressure, timing, resistance management, spray interval, and the specific fungicide formulation.
Insect pests may occupy the upper or lower leaf surface, leaf axils, stems, or sheltered canopy locations. Better spreading and deposition can improve the chance that the spray reaches the target zone. This is particularly valuable when pest populations are unevenly distributed or when foliage has a strong wax layer.
An adjuvant can also help improve coverage in aerial and drone applications where the carrier volume is limited. However, droplet size, wind speed, humidity, nozzle selection, and buffer-zone requirements must be managed carefully to reduce drift risk.
Foliar fertilizers and micronutrient solutions benefit from uniform contact with leaf surfaces. An organosilicone adjuvant can improve wetting and help distribute nutrients more evenly. This may be useful for programs involving trace elements, plant biostimulants, or growth regulators.
Because salts and nutrient concentrates can alter spray behavior, jar testing is recommended before application. Growers should also monitor crop sensitivity, concentration, temperature, and drying conditions.
Aerial and drone spraying often uses lower carrier volumes than conventional ground-rig application. This makes droplet coverage and spreading efficiency especially important. The GT-series agricultural organosilicone adjuvant can serve as a carrier aid for programs where the goal is to improve coverage per liter of spray solution.
Low-volume application requires precise calibration. The adjuvant cannot compensate for unsuitable droplet size, excessive wind, poor flight height, blocked nozzles, or inadequate swath overlap. Professional operators should follow local aerial-application rules and the pesticide label.
The performance of a silicone adjuvant depends on molecular consistency. Small changes in silicone structure, polyether modification, residual impurities, water content, or blending conditions can influence surface tension, cloud point, viscosity, compatibility, and storage stability. For this reason, manufacturing capability is a major factor when selecting a long-term supplier.
Hebei Guituo New Material Co., Ltd. integrates research and development, production, sales, and technical support. Its production system is supported by modern manufacturing equipment, testing facilities, experienced technical personnel, and a process-oriented quality-monitoring mechanism.
Integrated production allows the manufacturer to monitor the product from the starting materials through to finished packaging. Raw materials can be evaluated for identity, purity, and suitability before they enter the process. Production parameters can then be controlled during silicone synthesis, polyether modification, blending, dilution, filtration, and filling.
This approach is important for agricultural adjuvants because customers expect repeatable behavior from one batch to the next. A stable surface-tension profile helps formulators maintain predictable wetting and spreading performance when they develop tank-mix recommendations or finished pesticide products.
The company uses testing facilities to evaluate key quality indicators, including viscosity, surface tension, pH, appearance, compatibility, and other product-specific parameters. The reported technical profile for the GT series gives customers a basis for incoming inspection and batch comparison.
Quality control may be conducted at several stages. Incoming raw materials can be checked before use. In-process samples can be tested during production. Finished products can be inspected before release. Retained samples may also support future investigations, customer service, and quality traceability.
Agricultural adjuvant manufacturing requires coordination between chemistry, process engineering, laboratory testing, packaging, logistics, and customer application support. An experienced technical and production team can help identify deviations, adjust process conditions, and improve product consistency.
The manufacturer’s technical personnel can also assist customers with dosage screening, water-quality evaluations, active-ingredient compatibility, and crop-specific trial design. This support is particularly valuable for overseas distributors and agricultural formulation companies developing products for different climates.
The company accepts OEM and ODM orders. This capability can support distributors, formulation companies, and agricultural brands that require customized packaging, private labeling, concentration options, or application-specific development.
Customization may include packaging size, label design, product documentation, trial samples, and formulation adjustment. Any modification should be confirmed through technical evaluation because changes to the silicone-polyether balance can affect surface tension, cloud point, compatibility, foam behavior, and crop safety.
The product series can be supplied in smaller formats for laboratory screening, demonstration plots, and small farm trials. The supplied information identifies 200 mL and 1 L packaging for trial or small-area use and 2 L containers for larger acreage. Drum-scale packaging can be discussed for confirmed volume orders.
Packaging selection should be based on the customer’s dosing method, storage conditions, transportation requirements, and expected consumption. Smaller packaging may simplify field testing, while larger containers can reduce packaging waste and handling cost during commercial use.
Each commercial shipment can be supported with documentation such as a Safety Data Sheet and Certificate of Analysis. Available REACH and RoHS testing references may also be provided when applicable to the customer’s market and regulatory requirements. Buyers should confirm which documents are required for their country, product registration pathway, and intended use.
Before commercial use, customers should conduct a compatibility test using the actual pesticide, water source, and application concentration planned for the field. A small jar test can identify obvious precipitation, separation, excessive foam, gel formation, or unexpected changes in appearance.
A typical mixing sequence begins with filling the spray tank with clean water to an appropriate partial volume. Water conditioners or buffering agents may be added first when required by the pesticide label. Water-soluble products, suspension concentrates, emulsifiable concentrates, and other pesticide formulations should be added in the order recommended by the product manufacturer.
The agricultural organosilicone adjuvant is generally added after the primary pesticide formulation has been dispersed, unless the technical instructions specify another sequence. Continuous agitation helps maintain uniformity. The final tank mixture should be used within the recommended period and should not be stored overnight unless stability has been confirmed.
Field trials should compare an untreated adjuvant control with the organosilicone treatment under the same spray conditions. Useful measurements may include leaf coverage, droplet retention, visible wetting time, rainfall response, pest-control efficacy, crop safety, spray volume, and total cost per treated area.
Dosage should be optimized rather than automatically maximized. Higher adjuvant rates do not always produce better results and may increase the risk of crop injury, foaming, incompatibility, or excessive penetration. The correct rate depends on the pesticide, crop, water volume, equipment, and application objective.
The environmental value of an agricultural adjuvant comes primarily from improved application efficiency. If better spreading and retention reduce the amount of spray lost from the target surface, less material may be carried away by wind, runoff, or rainfall. If the pesticide remains effective for longer, fewer repeat applications may be required in some programs.
Reduced water consumption can also support more sustainable field operations. Lower water demand may reduce pumping, transportation, fuel use, and labor. These benefits are especially relevant in water-limited regions and in large-scale farming systems.
However, an adjuvant should not be described as automatically environmentally harmless. It remains a functional chemical component and must be handled responsibly. Users should prevent spills, avoid contamination of water bodies, follow disposal requirements, and comply with all pesticide and agricultural chemical regulations.
Organic farming use depends on certification and regional rules. The fact that an adjuvant is used in agriculture does not automatically mean it is approved for organic production. Operators should verify compliance with the applicable organic standard before use.
Purchasing an agricultural organosilicone adjuvant is not only a matter of selecting a low surface-tension liquid. Long-term supply reliability, batch consistency, technical support, documentation, packaging flexibility, and regulatory cooperation are equally important.
An experienced supplier can help customers avoid common problems such as inconsistent spreading, changes in cloud point, unexpected separation, unsuitable packaging, or insufficient documentation. A manufacturer with its own production and testing capabilities can also respond more quickly to technical questions and custom-development requirements.
Hebei Guituo New Material Co., Ltd. has developed a broad silicone-material product portfolio that includes silicone additives, wetting agents, modified silicone oils, dimethyl silicone oils, surfactants, defoamers, and related materials. These products serve agricultural, textile, daily chemical, electronics, and other industrial fields.
The company’s product development and supply system is supported by production equipment, laboratory facilities, technical staff, and quality-control procedures. Its agricultural silicone products are supplied to domestic agrochemical enterprises and international customers in markets including Europe and Southeast Asia. The company also operates through Ningbo Guituo Trading Co., Ltd. for trading and customer-service activities.
For distributors and formulation companies, this combination of manufacturing capacity and commercial support can simplify sourcing. Customers may request technical data, samples, Certificates of Analysis, Safety Data Sheets, OEM packaging, ODM development, or application guidance according to their project needs.
The GT-8110, GT-8210, and GT-8310 models belong to the same agricultural organosilicone adjuvant product family. The exact differences among the models should be confirmed through the current technical data sheets because model selection may depend on spreading speed, compatibility, cloud point, application environment, formulation type, and target market requirements.
GT-8110 may be selected as a general-purpose starting point for screening across herbicides, fungicides, insecticides, and foliar fertilizers. GT-8210 or GT-8310 may be evaluated when a customer requires a different balance of wetting, spreading, compatibility, or formulation behavior. Product comparison should be performed under the actual water quality and pesticide conditions of the intended market.
For international customers, the selection process should include regulatory review, packaging confirmation, transportation classification, language requirements, and local crop-use recommendations. A trial order can help establish performance before a full-volume purchase.
An agricultural organosilicone adjuvant is a silicone-based surfactant added to a pesticide, foliar fertilizer, or plant growth regulator spray to improve wetting, spreading, adhesion, penetration support, and coverage. It is generally not the primary pest-control active ingredient.
The product reduces the surface tension of the spray solution. This allows droplets to spread more quickly and broadly across plant surfaces, reducing beading and improving the distribution of the applied material.
It can support absorption by improving contact with the leaf surface and facilitating movement into accessible surface structures, including stomatal openings under suitable conditions. The degree of improvement depends on the pesticide, crop, leaf condition, weather, and dosage.
In suitable low-volume or optimized spray programs, improved spreading may allow a reduction in carrier-water volume. The supplied product information indicates a potential reduction of approximately 30–50 percent. Field validation is required, and spray volume must remain appropriate for the crop and equipment.
No product should be considered completely rainproof. The adjuvant can improve adhesion and may extend rainfastness when used with a compatible pesticide, but rainfall soon after application can still reduce performance. Always follow the pesticide label’s rainfastness instructions.
The product is designed for use with a broad range of agricultural formulations, including herbicides, fungicides, insecticides, foliar fertilizers, and plant growth regulators. Compatibility testing should be conducted for each specific formulation.
Its low-surface-tension and spreading characteristics may support drone and aerial spray programs where coverage per unit of water is important. Operators must still calibrate the equipment, manage droplet size, observe weather restrictions, and follow local regulations.
Use in organic farming depends on the requirements of the relevant certification system and jurisdiction. Customers must verify whether the specific product, ingredients, and intended use are permitted before application.
Customers may request a technical data sheet, Safety Data Sheet, Certificate of Analysis, and available regulatory or testing references. The exact documentation package should be confirmed when placing an order.
OEM and ODM services are available for qualified projects. Private-label packaging, bottle design, concentration, documentation, and order volume should be discussed with the supplier’s technical and commercial teams.
Buyers should review surface tension, viscosity, pH, cloud point, appearance, batch consistency, compatibility, storage stability, and field performance. A Certificate of Analysis and retained-sample comparison can support quality verification.
The correct dosage depends on the pesticide, crop, water volume, equipment, and application objective. Users should follow the supplier’s technical guidance and conduct a jar test and small-area field trial before commercial use.
Agricultural organosilicone adjuvants provide a practical way to improve the physical performance of crop protection and plant nutrition sprays. By lowering surface tension, accelerating spreading, supporting penetration, improving adhesion, and promoting more uniform coverage, the GT-8110, GT-8210, and GT-8310 series can help formulators and growers use spray mixtures more efficiently.
The product’s reported technical profile includes a surface tension below 20.5 mN/m at 0.1 percent by weight, a near-neutral pH range, controlled viscosity, and a high-purity polyether-modified trisiloxane composition. These characteristics make the series suitable for evaluation in herbicide, fungicide, insecticide, foliar fertilizer, plant growth regulator, and aerial-application programs.
Its competitive value is supported not only by low surface tension but also by the manufacturing capabilities of the supplier. Integrated production, laboratory testing, process monitoring, technical personnel, OEM and ODM support, and international supply experience help customers obtain a more consistent and serviceable product.
For best results, buyers should evaluate the adjuvant in the actual crop, pesticide, water, equipment, and weather conditions of the intended application. Proper compatibility testing, dosage optimization, responsible handling, and compliance with pesticide labels remain essential. When these factors are managed correctly, agricultural organosilicone adjuvants can contribute to better coverage, more efficient spray operations, lower water consumption, and more reliable crop protection performance.
Manufacturer: Hebei Guituo New Material Co., Ltd.
Product models: GT-8110, GT-8210, and GT-8310.
Primary applications: Herbicides, fungicides, insecticides, foliar fertilizers, plant growth regulators, low-volume spraying, drone spraying, and aerial application support.
Contact telephone: +86-400-138-5268.
Contact email: [email protected].
Manufacturing address: Xinqiao Environmental Protection Industrial Park, Wen'an County, Langfang City, Hebei Province, China.
1. Agricultural Organosilicone Adjuvant Technical Information, GT-8110/GT-8210/GT-8310 product specification.
2. Supplier-provided product data concerning viscosity, surface tension, cloud point, pH, purity, and application characteristics.
3. General principles of pesticide adjuvant formulation, spray deposition, droplet spreading, wetting, and foliar absorption.
4. General guidance on pesticide compatibility testing, tank-mix preparation, crop safety evaluation, and rainfastness assessment.
5. General technical literature concerning polyether-modified trisiloxane surfactants and agricultural spray performance.
6. Manufacturer information concerning silicone additives, wetting agents, modified silicone oils, surfactants, defoamers, OEM services, and ODM development.