2026-09-27

107 silicone rubber is a hydroxyl-terminated polydimethylsiloxane used as an important base material in silicone formulations, sealants, coatings, elastomers, release systems, and other specialty chemical products. Its chemical name is α,ω-dihydroxy polydimethylsiloxane, and it is commonly identified as OH-PDMS. In conventional industry terminology, hydroxyl-terminated silicone oils with viscosities above approximately 2,500 mPa·s are often referred to as 107 silicone rubber.
Unlike ordinary low-viscosity dimethyl silicone oils, 107 silicone rubber combines the characteristic properties of methyl silicone materials with the reactive activity of terminal hydroxyl groups. These hydroxyl groups allow the material to participate in condensation, crosslinking, modification, and film-forming reactions. As a result, it can be used not only as a functional silicone fluid but also as a precursor for elastomers, protective films, adhesives, sealants, and other silicone-based products.
The material supplied under the LD-107 model is a colorless and transparent liquid with high purity, good electrical insulation, excellent resistance to temperature changes, low surface tension, water repellency, and chemical stability. It is suitable for customers who require a dependable silicone raw material with controllable viscosity and broad formulation compatibility.
For manufacturers, product performance is only one part of the purchasing decision. Consistent quality, reliable supply, process control, technical support, packaging, customization, and long-term cooperation are equally important. Hebei Guituo New Material Co., Ltd. has developed a product and service system focused on silicone additives, silicone oils, wetting agents, surfactants, defoamers, and related organosilicon materials. Its manufacturing and quality-control capabilities support the use of 107 silicone rubber in agricultural, industrial, electronic, textile, daily chemical, and other applications.
107 silicone rubber is a linear polysiloxane whose backbone consists of alternating silicon and oxygen atoms. Methyl groups are attached to the silicon atoms, while hydroxyl groups are located at the two ends of the polymer chain. This molecular structure gives the product a valuable combination of flexibility, chemical inertness, low surface energy, and reactive terminal functionality.
The main product information for LD-107 is summarized below.
| Item | Information |
|---|---|
| Product model | LD-107 |
| Product name | 107 Silicone Rubber |
| Chemical name | α,ω-Dihydroxy polydimethylsiloxane |
| Common synonym | Hydroxyl-Terminated Polydimethylsiloxane, OH-PDMS |
| CAS number | 63148-60-7 |
| EINECS number | 613-154-4 |
| Purity | 99.8% |
| Physical appearance | Colorless and transparent liquid |
| Typical classification | High-viscosity hydroxyl-terminated silicone polymer |
| Primary function | Silicone base polymer, reactive intermediate, film former, and elastomer precursor |
The exact processing behavior of 107 silicone rubber depends on its viscosity, molecular weight, hydroxyl value, temperature, mixing conditions, and compatibility with other formulation components. Therefore, buyers should select a grade according to the requirements of the final product rather than relying solely on the general product name.
Dimethyl silicone oil and 107 silicone rubber are chemically related materials, but their molecular weight and viscosity ranges are different. Low-viscosity dimethyl silicone oils generally contain shorter polymer chains and are valued for their fluidity, lubrication, spreading, release, and surface-modification properties. As the chain length and molecular weight increase, the material becomes more viscous and gradually develops rubber-like behavior.
107 silicone rubber is distinguished by its hydroxyl termination. The terminal hydroxyl groups can react with suitable crosslinking agents, fillers, catalysts, or other functional compounds. This reactive activity enables the material to form a cured elastomer or film under suitable conditions. Ordinary non-reactive silicone oils may provide excellent slip and release properties, but they do not normally offer the same crosslinking potential.
The relationship between these materials allows formulators to create systems with adjustable flow, flexibility, surface energy, and curing behavior. A formulation may use 107 silicone rubber as the primary polymer while adding dimethyl silicone oil to modify processing, lubrication, or surface characteristics. Modified silicone oils, wetting agents, surfactants, and defoamers may also be used to improve dispersion and application performance.
This compatibility with a broader silicone product family is a practical advantage for customers working with an integrated supplier. Instead of purchasing a base polymer from one source and additives from several unrelated sources, customers may obtain coordinated materials and technical assistance from a supplier with experience across multiple silicone product categories.
One of the most important advantages of 107 silicone rubber is its ability to maintain useful performance across a broad temperature range. The product can be used for extended periods under conditions of approximately -50°C to +250°C, depending on the formulation, curing system, operating environment, and final product design.
Silicone polymers are known for retaining flexibility at low temperatures and maintaining stability at elevated temperatures. This makes 107 silicone rubber suitable for products exposed to seasonal temperature changes, thermal cycling, outdoor environments, heated equipment, and demanding industrial conditions. Compared with many organic polymers, silicone materials generally show a lower tendency toward embrittlement at low temperatures and better resistance to thermal degradation during continuous service.
Temperature resistance should always be evaluated in the final formulation. The stability of a cured silicone product may be affected by fillers, pigments, catalysts, plasticizers, crosslinking agents, substrate interaction, and exposure to moisture or chemicals. Nevertheless, the inherent thermal stability of the 107 silicone rubber backbone provides a strong starting point for high- and low-temperature applications.
107 silicone rubber has excellent electrical insulation properties. Its molecular structure, low ionic character, and resistance to moisture absorption make it suitable for insulating materials, protective coatings, potting systems, electronic components, and electrical assemblies.
Electrical insulation performance can remain relatively stable across changing temperature and humidity conditions when the material is correctly formulated and cured. This characteristic is valuable in applications where an insulating layer must protect components from moisture, contamination, vibration, or temperature variation.
For electronic applications, users should evaluate dielectric strength, volume resistivity, dielectric constant, dissipation factor, adhesion, curing shrinkage, and long-term aging in the specific system. 107 silicone rubber may serve as a base polymer, but the final electrical properties depend on the complete formulation and processing method.
The product features a high flash point and a low freezing or pour point. A high flash point can support safer handling and processing when compared with materials that ignite more easily under similar conditions. A low pour point helps maintain mobility and processability in cold storage or low-temperature working environments.
These properties are especially relevant for manufacturers operating across different climates. During transport and storage, the material is less likely to become immobile solely because of moderate cold conditions. During production, appropriate temperature management can further improve pumping, metering, and mixing performance.
Safety procedures remain necessary. A high flash point does not mean that the product is nonflammable, and storage areas should still be equipped with suitable ventilation, spill control, labeling, and fire-prevention measures.
107 silicone rubber has a relatively low viscosity-temperature coefficient compared with many conventional organic polymers. Its viscosity changes with temperature, but the rate of change can be more manageable across a broad operating range. This supports more consistent flow behavior during production, especially when ambient conditions fluctuate.
In practical processing, mild heating may be used to reduce viscosity and improve pumping or mixing. Such temperature adjustment should be controlled carefully to avoid excessive moisture exposure, premature reaction, or changes in formulation stability. The correct processing temperature depends on the viscosity grade, equipment, mixing speed, batch size, and presence of reactive additives.
Silicone materials generally have lower surface tension than many organic polymer systems. This property allows 107 silicone rubber to spread effectively over suitable substrates and to contribute to smooth, uniform surface coverage. In coatings, release systems, and surface-treatment formulations, low surface tension can help improve wetting and reduce the risk of incomplete coverage.
Low surface tension can also support the development of smooth films and controlled surface feel. However, excessive silicone migration or incompatibility may cause adhesion problems in some coating systems. Formulators should therefore balance wetting, spreading, release, and substrate adhesion according to the final application.
The methyl groups in the silicone backbone provide hydrophobic characteristics. 107 silicone rubber can contribute to water repellency, moisture resistance, and reduced water penetration when incorporated into suitable coatings, sealants, and protective materials.
This property is valuable in outdoor products, electrical protection, textiles, construction-related materials, agricultural formulations, and industrial coatings. Moisture resistance may help preserve the integrity of a product exposed to humidity, condensation, rain, or intermittent water contact.
107 silicone rubber exhibits strong chemical stability and is generally resistant to many common chemical environments. It can support the development of materials that need to remain stable in contact with water, dilute chemical solutions, and selected industrial ingredients.
The product is also characterized by physiological inertness in the supplied material description. Specific end-use approval requirements must be assessed separately. Applications involving food contact, medical devices, cosmetics, pharmaceuticals, or direct biological exposure may require additional regulatory documentation, migration testing, or grade selection.
The terminal hydroxyl groups are one of the most valuable features of 107 silicone rubber. These groups provide reactive sites for condensation and crosslinking. With a suitable curing system, the polymer can be transformed from a viscous liquid into an elastomeric solid, flexible film, adhesive layer, or protective coating.
This reactive function gives 107 silicone rubber an advantage over purely inert silicone fluids. It can be used in formulations that require permanent network formation rather than temporary lubrication or surface modification. The curing response depends on the crosslinking agent, catalyst, moisture level, temperature, formulation ratio, and substrate.

107 Silicone Rubber
Viscosity is one of the most important indicators for selecting 107 silicone rubber. In general, higher viscosity corresponds to longer polymer chains, greater molecular weight, and more extensive chain entanglement. Lower-viscosity grades contain shorter chains and flow more readily.
Viscosity affects nearly every stage of production, including pumping, metering, mixing, dispersion, coating, filling, deaeration, packaging, and curing. It also influences the final product’s film thickness, elasticity, mechanical strength, sag resistance, and surface appearance.
| Viscosity Direction | Processing Characteristics | Potential Advantages | Typical Application Direction |
|---|---|---|---|
| Low | Easy pumping, rapid mixing, good flow | Efficient dosing and easier additive dispersion | Agricultural formulations, daily chemicals, fluid systems |
| Medium | Balanced flow and film formation | Good compromise between processability and body | General industrial silicone formulations |
| High | Greater processing resistance and stronger body | Improved film thickness, elasticity, and sag control | Electronics, textile finishing, sealants, and elastomer systems |
Low-viscosity 107 silicone rubber is easier to transfer through pipes, pumps, valves, and metering systems. It can reduce mixing energy and make it easier to combine the polymer with pigments, fillers, surfactants, wetting agents, defoamers, or other silicone additives.
These grades may be suitable for applications requiring rapid spreading, smooth coating, controlled dosing, and efficient production. They are often attractive for agricultural formulations and daily chemical products where a material must blend quickly with other liquid ingredients.
Medium-viscosity grades offer a balance between fluidity and film-forming ability. They can provide sufficient body for coating and sealing while remaining manageable in conventional industrial mixing equipment.
This balance makes them useful for general-purpose silicone systems. They may be selected when the customer needs both reasonable production efficiency and a stable final film or elastomer. Medium viscosity is often a practical starting point for formulation development before further optimization.
High-viscosity 107 silicone rubber contains longer polymer chains and tends to produce stronger film-forming and elastomeric properties after curing. It may improve elasticity, cohesion, thickness control, and resistance to flow or sagging.
However, high viscosity also increases processing resistance. The production line may require stronger agitators, larger motors, heated transfer lines, positive-displacement pumps, or longer mixing times. Vacuum deaeration may also need adjustment because air removal from a high-viscosity system is more difficult.
As temperature increases, the viscosity of 107 silicone rubber generally decreases. This can improve flow and simplify pumping, but excessive heating should be avoided. Temperature must be controlled according to the formulation’s curing chemistry and the thermal stability of other ingredients.
A controlled temperature strategy can help maintain batch-to-batch consistency. Manufacturers may establish a standard storage temperature, transfer temperature, mixing temperature, and filling temperature. This reduces variation caused by seasonal changes and improves production repeatability.
107 silicone rubber should be stored in clean, dry, tightly closed containers. The material should be protected from contamination, excessive moisture, direct sunlight, and unnecessary temperature fluctuations. Storage conditions should follow the supplier’s technical documentation and applicable safety requirements.
Before use, the container should be inspected for leakage, contamination, abnormal appearance, or unexpected changes in viscosity. If the material has been stored for a long period, a small sample may be tested before it is introduced into a large production batch.
The correct mixing sequence can significantly influence final performance. In many systems, 107 silicone rubber is first introduced into the main vessel and then combined with compatible oils, fillers, pigments, surfactants, wetting agents, or other additives under controlled agitation.
High-shear mixing may improve dispersion, but excessive shear can introduce air or increase the temperature of the batch. Low-shear mixing may be adequate for simple liquid blends but insufficient for heavily filled systems. The optimum procedure should be determined through pilot testing.
Because hydroxyl-terminated silicone polymers may participate in moisture-sensitive condensation systems, water content can influence curing behavior, storage stability, and viscosity changes. Excess moisture may lead to premature reaction, bubbles, surface defects, or inconsistent cure speed in certain formulations.
Manufacturers should maintain appropriate control over raw materials, containers, equipment cleanliness, and production-room humidity. The required level of moisture control depends on the selected crosslinking technology and the final application.
Although 107 silicone rubber is compatible with many silicone-based materials, compatibility should not be assumed for every organic additive, solvent, filler, pigment, or resin. Small-scale tests should be conducted to check clarity, phase stability, viscosity drift, adhesion, curing, surface appearance, and storage behavior.
Particular attention should be paid when using non-silicone ingredients. Some materials may cause separation, cloudiness, cure inhibition, surface cratering, or reduced adhesion. The use of a compatible silicone additive package can help reduce these risks.
High-viscosity materials can trap air during mixing. Entrained air may create bubbles, pinholes, weak spots, or surface defects in the final product. A suitable defoamer or vacuum deaeration process may be used to improve product uniformity.
The defoamer must be selected carefully. An unsuitable defoamer may cause poor adhesion, surface defects, gloss variation, or instability. Hebei Guituo New Material Co., Ltd. supplies defoamers and other silicone-related additives that can be evaluated alongside 107 silicone rubber during formulation development.
Viscosity affects coating thickness, leveling, sag resistance, and drying or curing behavior. Low-viscosity material spreads readily and can produce a thin, smooth layer. Higher-viscosity material can produce thicker films but may require greater control of application speed, temperature, and substrate condition.
Substrate cleanliness is critical. Oil, dust, moisture, and release contaminants may reduce adhesion. Surface treatment, primer selection, coating speed, and curing conditions should be optimized for each substrate.
One of the most established uses of 107 silicone rubber is as a base polymer for silicone sealants and adhesive materials. Its hydroxyl groups can react with suitable curing components to form flexible networks with good weatherability, temperature resistance, and moisture resistance.
In sealant systems, the material may contribute to elasticity, cohesion, durability, and resistance to environmental aging. Formulators can adjust filler levels, plasticizer content, crosslinking chemistry, catalyst concentration, and viscosity to achieve the required application behavior.
Potential uses include construction joints, industrial sealing, equipment protection, electronic assembly, and general bonding. The exact suitability depends on the required adhesion, modulus, cure speed, movement capability, and exposure conditions.
107 silicone rubber can be used in electrical insulation, protective coatings, encapsulation, potting compounds, and component sealing. Its electrical insulation and temperature resistance support applications where components must remain protected during thermal cycling and exposure to humidity.
Electronic formulations often require low ionic contamination, controlled cure shrinkage, good adhesion, low volatile content, and predictable dielectric properties. These parameters should be tested in the finished formulation rather than inferred only from the base polymer.
Silicone-based materials are widely used in textile finishing to improve softness, smoothness, hand feel, lubricity, and surface performance. 107 silicone rubber may serve as a reactive or film-forming component in selected textile systems.
Higher-viscosity grades may be considered when a stronger coating or more persistent surface effect is required. However, the formulation must be designed to avoid excessive surface transfer, staining, uneven application, or reduced recoatability.
Silicone materials play an important role in modern agricultural formulations. They can support wetting, spreading, penetration, foam control, and surface coverage. Although specialized organosilicon surfactants are often selected for direct adjuvant functions, 107 silicone rubber can be useful as a silicone raw material or as part of a broader formulation-development program.
In agricultural applications, compatibility with active ingredients, emulsifiers, solvents, water quality, storage conditions, and application equipment must be carefully evaluated. Viscosity selection is particularly important because the final product must be easy to blend, pump, meter, and apply in the field.
Hebei Guituo New Material Co., Ltd. has a product matrix covering agricultural silicone products, wetting agents, surfactants, modified silicone oils, dimethyl silicone oils, and defoamers. This broader range allows customers to evaluate 107 silicone rubber together with complementary materials for agricultural formulation development.
Silicone materials can improve spreading, slip, smoothness, gloss, water repellency, and sensory feel in selected daily chemical products. 107 silicone rubber may be used as a raw material or intermediate where a more durable film or reactive silicone structure is required.
For personal care, household, or consumer-facing applications, regulatory compliance, purity, odor, skin compatibility, and formulation stability must be assessed according to the intended use. Customers should request the appropriate technical and safety documents for the target market.
The low surface energy of silicone materials makes them valuable in release applications. Silicone-based release systems can help prevent adhesion between a molded product and the mold surface, or between layers in industrial processing.
The final release performance depends on film uniformity, curing, surface energy, substrate type, temperature, pressure, and the material being released. 107 silicone rubber may be used in reactive release formulations where a durable silicone film is desired.
107 silicone rubber can contribute to hydrophobicity, weather resistance, and flexible film formation in protective coatings. These coatings may be designed for surfaces exposed to moisture, condensation, temperature fluctuations, or outdoor conditions.
Formulation developers should balance water repellency with adhesion and vapor permeability. A coating that strongly repels water but adheres poorly may not provide long-term protection. Surface preparation, curing, and film thickness must therefore be controlled.
The performance of a silicone raw material depends not only on its chemical structure but also on manufacturing discipline. Polymerization, end-group control, purification, viscosity adjustment, filtration, packaging, and testing all influence the finished product.
Hebei Guituo New Material Co., Ltd. is a high-technology enterprise integrating research and development, production, and sales. Its manufacturing system is designed to support a broad product portfolio that includes silicone additives, wetting agents, modified silicone oils, dimethyl silicone oils, surfactants, defoamers, and related organosilicon materials.
The company has established production capabilities supported by internationally advanced equipment. Modern equipment contributes to more stable reaction conditions, improved temperature control, precise material transfer, and better batch repeatability.
For high-viscosity silicone polymers, equipment design is particularly important. Reactors, agitators, pumps, pipelines, filters, and filling systems must be capable of handling viscous materials without creating excessive shear, contamination, or air entrainment. Appropriate equipment also supports safer and more efficient production.
The company has built a quality-monitoring mechanism covering the process from production source to finished-product delivery. Such a system can help identify variation at different stages, including raw-material inspection, process control, intermediate testing, final-product analysis, packaging inspection, and shipment verification.
For 107 silicone rubber, important quality-control points may include appearance, viscosity, purity, moisture, hydroxyl functionality, volatile content, contamination, and storage stability. The exact test methods and acceptance limits should be confirmed through the product technical specification supplied to the customer.
An experienced technical and production team is essential for handling customized silicone products. Customers may require a particular viscosity range, packaging format, compatibility profile, curing response, or application performance. These needs often require communication between research personnel, production engineers, quality specialists, and sales technicians.
Technical experience also helps with troubleshooting. Problems such as viscosity drift, phase separation, incomplete curing, surface defects, or poor additive dispersion may have several possible causes. A supplier with knowledge of both base polymers and functional additives can provide more practical assistance than a supplier offering only a single isolated raw material.
The company’s broad product matrix is an important competitive advantage. 107 silicone rubber may need to be combined with silicone oils, surfactants, wetting agents, defoamers, or modified silicone materials. Access to related products from one supplier can simplify sourcing, compatibility testing, and supply planning.
This coordinated approach may reduce communication costs and support faster formulation development. It can also help customers maintain consistency when scaling from laboratory testing to pilot production and then to commercial manufacturing.
The company’s agricultural silicone products have been adopted by leading domestic agrochemical enterprises, and its products are exported to overseas markets including Europe and Southeast Asia. This market experience indicates the importance placed on stable performance, consistent quality, and customer service across different commercial environments.
International customers may require different packaging, labeling, documentation, shipping arrangements, and regulatory support. A supplier experienced in overseas business is better positioned to coordinate these requirements and support repeat purchasing.
OEM and ODM services provide additional flexibility for customers with specialized product concepts or private-label requirements. Customization may involve product packaging, branding, viscosity range, formulation support, or application-specific development.
Customers should provide detailed information about the intended use, processing equipment, target viscosity, required packaging, storage conditions, regulatory market, and performance objectives. Clear technical communication enables the supplier to recommend a more suitable product and avoid unnecessary trial-and-error.
Many conventional organic polymers are sensitive to low-temperature embrittlement, high-temperature softening, oxidation, or rapid property loss. 107 silicone rubber offers a broader useful temperature range and can support products exposed to more severe thermal conditions.
Non-reactive silicone oils are stable and useful for surface modification, but they may not form a permanent elastomer network. Some reactive organic polymers can cure effectively but may have weaker weatherability or temperature resistance. 107 silicone rubber combines a stable silicone backbone with hydroxyl reactivity, providing both durability and formulation flexibility.
The availability of different viscosity ranges allows formulators to select a material according to the production method. Low-viscosity grades support pumping and rapid mixing, while high-viscosity grades support thicker films, stronger body, and improved elasticity after curing.
Because the company supplies multiple categories of silicone materials, customers can develop a coordinated formulation using compatible silicone oils, wetting agents, surfactants, and defoamers. This product breadth can be more efficient than sourcing each component from different suppliers.
Manufacturing equipment, process monitoring, testing facilities, technical personnel, OEM services, and overseas supply experience create a stronger support structure for industrial customers. These capabilities are particularly important when 107 silicone rubber is used in continuous production or in products where batch consistency is critical.
Customers should consider several factors before selecting 107 silicone rubber. The first is the required viscosity at the actual processing temperature. A material that appears suitable at room temperature may become too viscous during cold-weather production or too fluid during heated processing.
The second factor is the intended curing or crosslinking method. Hydroxyl-terminated silicone polymers may be used with different curing systems, and the selected catalyst or crosslinker can affect cure speed, storage stability, hardness, elasticity, adhesion, and by-product formation.
The third factor is compatibility with other ingredients. Customers should test the material with all important components, including fillers, pigments, solvents, resins, surfactants, active ingredients, and plasticizers.
The fourth factor is the final performance requirement. A flexible sealant, a textile finish, an agricultural formulation, an electronic encapsulant, and a release coating do not require the same balance of viscosity, cure behavior, adhesion, surface energy, and moisture resistance.
| Selection Factor | Questions to Evaluate | Why It Matters |
|---|---|---|
| Viscosity | What viscosity is required at the processing temperature? | Determines pumping, mixing, coating, and filling behavior |
| Curing system | Which crosslinker and catalyst will be used? | Controls cure speed, hardness, elasticity, and storage stability |
| Compatibility | Will the polymer remain uniform with other ingredients? | Reduces separation, haze, defects, and performance loss |
| End use | Is the product for agriculture, electronics, textiles, sealing, or release? | Defines the required balance of properties |
| Storage | What temperature, humidity, and shelf-life conditions apply? | Supports consistent quality during distribution and use |
| Compliance | Are special regulatory or documentation requirements needed? | Ensures suitability for the destination market |
Industrial buyers should request a technical data sheet, safety data sheet, certificate of analysis, packaging information, recommended storage conditions, and available test data. The supplier should also clarify whether the product is suitable for the customer’s specific application and whether customized viscosity or packaging is available.
Typical incoming-quality tests may include visual inspection, viscosity measurement, purity analysis, moisture determination, density measurement, infrared identification, and compatibility screening. For reactive applications, hydroxyl value and curing behavior may also be important.
Finished-product testing should be performed under controlled conditions. Viscosity results can vary according to spindle type, rotational speed, temperature, sample conditioning, and test method. For this reason, customers and suppliers should agree on a standardized testing procedure.
Long-term storage tests can evaluate viscosity drift, phase separation, color change, moisture sensitivity, and curing response. Accelerated aging may provide additional information, but real-time storage testing remains valuable for confirming commercial shelf life.
Users should read the current safety data sheet before handling 107 silicone rubber. Personnel should use suitable protective equipment, including gloves, protective clothing, and eye protection, according to the workplace risk assessment.
The product should be handled in a clean and adequately ventilated area. Containers should remain closed when not in use. Spills should be contained and collected using procedures appropriate for viscous chemical materials. Contaminated absorbents and waste should be disposed of according to local regulations.
Storage containers should be protected from physical damage, excessive heat, freezing conditions, direct sunlight, and contamination. The product should not be mixed with incompatible materials or returned to the original container after contact with foreign substances.
Because specific storage life depends on packaging and environmental conditions, customers should follow the supplier’s recommended storage period and first-in, first-out inventory practices.
Hebei Guituo New Material Co., Ltd. combines research and development, manufacturing, quality management, sales, and technical service. This integrated structure supports customers who require more than a standard chemical commodity.
The company’s advantages include advanced production equipment, precise testing facilities, a full-process quality-monitoring system, experienced technical personnel, and a diverse organosilicon product portfolio. These strengths are particularly relevant to 107 silicone rubber because the product may be used as part of a larger formulation containing multiple silicone and non-silicone components.
The company can support customers across agriculture, daily chemicals, electronics, textiles, release systems, coatings, and other industries. Its agricultural silicone products have achieved strong domestic market recognition, while overseas customers in Europe and Southeast Asia have provided positive feedback through continued purchasing.
For customers with specific product concepts, the company also accepts OEM and ODM orders. This allows cooperation to move beyond standard supply toward customized product development, packaging, and application support.
107 silicone rubber is a high-viscosity hydroxyl-terminated polydimethylsiloxane, also known as α,ω-dihydroxy polydimethylsiloxane or OH-PDMS. It is a colorless, transparent silicone polymer that can be used as a base material, reactive intermediate, film former, or elastomer precursor.
The term refers to its high viscosity and rubber-forming capability rather than its initial physical state. Before curing or crosslinking, 107 silicone rubber is normally a viscous liquid. After reaction with a suitable curing system, it can form an elastic silicone material or film.
The CAS number provided for LD-107 107 silicone rubber is 63148-60-7. The EINECS number is 613-154-4.
The supplied product information lists a purity of 99.8%. Customers should confirm the current specification and certificate of analysis for each order.
Lower viscosity improves pumping, metering, mixing, and spreading. Higher viscosity increases processing resistance but can support stronger film formation, improved elasticity, thicker coatings, and better sag control after curing.
Controlled heating is often used to reduce viscosity and improve pumping or mixing. The heating temperature should be determined according to the product specification and the sensitivity of the complete formulation. Excessive heat may affect curing ingredients, moisture balance, or storage stability.
Yes, 107 silicone rubber can be used with dimethyl silicone oil in suitable formulations. Dimethyl silicone oil may adjust fluidity, lubrication, surface properties, or processing behavior. Compatibility and final performance should be confirmed through laboratory testing.
It can be incorporated into systems containing suitable surfactants and wetting agents. These additives may improve dispersion, spreading, emulsification, or application performance. The additive package should be selected according to the final formulation and tested for phase stability.
It may be suitable for selected agricultural formulation systems, particularly where silicone-based raw materials, film formation, or formulation modification are required. The correct viscosity, compatibility with active ingredients, storage stability, and regulatory suitability must be evaluated before commercial use.
107 silicone rubber can be used as a base polymer in selected electronic insulation, coating, sealing, and encapsulation systems. Customers should evaluate dielectric properties, adhesion, cure behavior, moisture resistance, ionic contamination, and thermal aging in the finished formulation.
Customization may be available for viscosity range, packaging, formulation support, OEM supply, and ODM development. Customers should provide detailed technical requirements so the supplier can evaluate the appropriate product solution.
Customers should provide the intended application, required viscosity, estimated annual volume, packaging preference, destination country, processing temperature, curing method, and any regulatory or documentation requirements. This information helps the supplier provide a more accurate recommendation and quotation.
Store it in clean, tightly closed containers in a dry, well-ventilated location protected from contamination, excessive heat, direct sunlight, and severe temperature changes. The current safety data sheet and technical data sheet should be followed for detailed storage guidance.
No. A high flash point can improve handling safety compared with lower-flash-point materials, but the product should still be handled as an industrial chemical. Proper ventilation, protective equipment, spill control, labeling, and fire-prevention measures remain necessary.
107 silicone rubber is a versatile hydroxyl-terminated silicone polymer that combines high-temperature and low-temperature performance, electrical insulation, water repellency, low surface tension, chemical stability, and reactive terminal hydroxyl groups. Its adjustable viscosity makes it suitable for different processing conditions, from fluid blending and agricultural formulation to high-viscosity coating, electronic protection, textile finishing, sealing, and elastomer production.
Compared with conventional non-reactive silicone oils, it provides stronger crosslinking and film-forming potential. Compared with many conventional organic polymers, it offers valuable resistance to thermal change, moisture, weathering, and chemical exposure. These advantages make it an important raw material for modern silicone product development.
The success of a 107 silicone rubber application depends on correct grade selection, viscosity control, compatibility testing, moisture management, curing design, and quality assurance. Hebei Guituo New Material Co., Ltd. supports these requirements through advanced production equipment, testing facilities, full-process quality monitoring, technical personnel, a broad silicone product matrix, overseas supply experience, and OEM and ODM capabilities.
For customers seeking a reliable supplier of 107 silicone rubber and related organosilicon materials, LD-107 provides a practical starting point for customized formulation development and long-term industrial cooperation.
1. Product technical information for LD-107 107 Silicone Rubber, supplied by Hebei Guituo New Material Co., Ltd.
2. General reference information on hydroxyl-terminated polydimethylsiloxane and silicone polymer chemistry.
3. General industrial guidance on silicone elastomer formulation, crosslinking, and viscosity control.
4. General technical references on silicone materials used in coatings, sealants, electrical insulation, textiles, agriculture, and release applications.
5. Applicable safety data sheets, technical data sheets, certificates of analysis, and local chemical-handling regulations.